Custom-built case with watercooling systems. This Ready2Go system is fully installed and ready for operation. All systems are shipped filled and ready for use.

You only have to install the waterblock(s) on your components and you are ready to enter the world of watercooling. The CPU waterblock is designed for Intel socket 775/1165/1366, but can also be changed upon customer request. The pump is to be connected to a 4-Pin Molex plug just like a HDD and will then start and stop with the system.
We have the following guidelines for system recommendations:

1 x 120mm Radiator: CPU (not overclocked)
2 x 120mm Radiator: CPU (overclocked) + 1 x GPU
3 x 120mm Radiator: CPU (overclocked) + Mainboard (NB, SB, Reg) + 1 x GPU

Watercooling Installed:
Case: Nexus Edge Case Full ATX Tower
CPU waterblock: Watercool HK CPU LGA1366 Rev. 3 incl. Watercool Backplate LGA 1366 M4
Radiator: Phobya G-Changer 360 incl. fan grill for axial fans for 120mm chrome
Pump: Laing DDC-Pumpe 12V DDC-1T incl. Laing DDC Plexi top
Pump decoupling: Shoggy Sandwich building kit for pump decoupling Rev. 2.0
Reservoir: Magicool Plexiac 250
Tubing: PUR 10,3/7,5mm flexible
Fans: Noiseblocker NB-Blacksilent XL1 Rev.3 ( 120x120x25mm )
Fittings: 11/8mm screw-on fittings G1/4" outer thread and 11/8mm screw-on fittings 90° revolvable G1/4"
Coolant: AT-Protect-Plus 1000ml

**All systems are built to order and ship pre installed, filled and ready to go**