NZXT SOURCE 340 Midi Tower - white / purple Window [CA-S340W-W3]

In this case, which consists of 90 percent of steel, the edges are exceptionally sharp, while its exterior is very smooth, minimalistic and geometrically shaped. Also thanks to its white surface, the small cuboid design is technically superior. In addition, the left side houses a window that opens the view of the white interior of the S340. The outer appearance is completed by pink accents on the front edge of the upper side as well as in the interior.

The front panel is completely flat and without I / O panel. This is located on the lid of the small housing space. On the panel are two USB 3.0 ports and two audio jacks as well as the discreet power button. There is also a small storage space for cables or similar available.

The interior, which is kept in elegant black, offers a great deal of space for hardware and cooling, despite the fact that the 5.25-inch slots are completely eliminated. In addition to ATX, Micro ATX and Mini ITX motherboards, seven expansion cards can also be installed in the enclosure. In addition, three 3.5-inch drives can also be installed in the drive cage. In addition, there are still two 2.5-inch slots on the bezel, which separates the power supply from the mainboard.

Behind the front is an accented bezel, behind which the cables can be hidden to and from the mainboard to keep the interior tidy and chic. To the front itself, there is a few centimeters distance, which allows the installation of two 140 or 120 mm fans as well as the accommodation of a 280 or 240 mm radiator. In addition, there is a preinstalled 120 mm fan in the back and lid. Practically, a dust filter is also installed in the front, which can be easily removed and cleaned. A 140 mm fan can also be installed in the cover instead of the pre-installed fan.

CPU coolers can be installed in the S340 with a height of up to 161 mm. Thin radiators can also be installed in the housing. If you do not have the fans in the front, you have up to 58 mm in width to install a 240 or even 280 radiator upright. If you build the cable management rail, you have about 120 mm space. In the rear, it is possible to install a 120 mm radiator with a thickness of approx. 50 mm, in addition to a fan with a regular 25 mm thickness.

Technical details:
Dimensions: 200 x 445 x 432 mm (W x H x D)
Material: steel, plastic
Weight: approx. 7 kg
Color: White / Pink
Form Factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
2x 140/120 mm (front)
1x 120 mm (rear side)
1x 140 / 1x 120 mm (cover)
Pre-installed:
1x 120 mm (cover)
1x 120 mm (rear side)
Filter: Front, bottom
Radiator mountings (with partial absence of fan / front rail):
1x 280 or 240 mm (front)
1x 120 mm (rear side)
Drive Shafts:
3x 3.5 inches (internal)
2x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0
1x per HD Audio In / Out
Maximum CPU cooler height: 161 mm
Maximum graphics card length: 364 mm