Limited Nickel-POM version with nickel plated cooling plate!

With this waterblock kit we offer the perfectly tailored cooling solution for the EVGA X58 SLI Classified 4-Way (170-BL-E762-A1) Mainboard!

On this Mainboard the Southbridge, Northbridge and the NF200 Chips are cooled by one Heatpipe. The VRM cooler is not integrated into this Heatpipe and therefore always requires Airflow from the CPU cooler. We hence strongly recommend cooling the Chipsets , NF200 Chips as well as VRM modules with water if you cool your CPU with water. This enables stable operation even when overclocked!

With our new Quad-Chip waterblocks it is possible to cool Southbridge, Northbridge as well as the NF200 Chips with one waterblock which offers you the following advantages:

    *

      No more fittings in the expansion slot area, all slots are fully operable with this waterblock!
    *

      Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.
    *

      The distance between the threads even allows the use of High-flow fittings
    *

      In combination with our VRM waterblock for the EVGA X58 SLI Classified all heat-sensitive elements are cooled with an uniform design!

This waterblock is the perfect expansion your you if you are already using a watercooled system.

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during  installation of this product and will not be liable.

Recommendation: For protection of the open X58 Northbridge we recommend to order the protective pad 31059 & 31060. Please make sure to use only non-conductive thermal compound such as the Arctic MX series!

Please note: The mounting screws in the area of the NF200 Chips must only be tightened lightly to avoid damaging these very sensitive chips!

Technical specifications Quadchip waterblock:
Dimensions baseplate: 175 x 165 mm
Overall size without fittings: 175 x 165 x 11mm (L x W x H)
Weight: ~200g
Baseplate material: Pure copper 5mm
Cover material: POM black 6mm
Connection thread size: 1/4´´

Technical specifications VRM waterblock:
Dimensions baseplate: 136 x 52mm
Overall size without fittings: 136 x 52 x 18mm (L x W x H wihtout fittings)
Weight: ~160g
Baseplate: Nickel plated copper 5mm
Middle plate: Nickel plated copper 5mm
Top plate: POM black 8mm
Connection thread size: G1/4"

Our waterblocks are always shipped without fittings, please order fittings separately if required!

Extent of delivery:
1 x EVGA X58 SLI Classified 4-Way Quadchip waterblock POM incl. 2 spacer rings
1x EVGA X58 SLI VRM waterblock POM incl. 2 spacer rings