MIPS EVGA Classified SR-2 Set Limited Edition [MCH4442]

Limited Nickel-POM edition with nickel plated cooling plates!

We present a specially designed waterblock kit for your EVGA SR-2 Mainboard.

On this Mainboard the VRM modules, Southbridge and Northbridge as well as both NF200 Chips are connected and cooled with a single passively cooled Heatpipe system. This Heatpipe only suffices to cool the Mainboard with very powerful CPU fans to allows stable operation.

If you are already using a watercooling system this Fusion block is the perfect extension for your system!

With our new Dualchip waterblock it is possible to cool Southbridge, Northbridge as well as the NF200 Chips with one waterblock which offers you the following advantages:

    *

      No more fittings in the expansion slot area, all slots are fully operable with this waterblock!
    *

      Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.
    *

      Not only the two Chips are cooled, other heat-critical components are also cooled for which the copper cooling plate was machined at four different levels

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during  installation of this product and will not be liable.

For protection of the open X58 Northbridge we recommend ordering the protective pad MCH0352!

Mounting note: The main waterblock is mounted from the back of the Mainboard using the included screws and plastic washers. Make sure to fasten the screws only hand-tight and evenly! For both Chipsets, both NF200 Chips as well as the Mosfets please use an electrically non-conductive thermal compound such as the Arctic Cooling MX 2/3 series. For the coils above the Mosfets please use the included thermal pad! The Mosfet waterblock for the CPU0 is also mounted with the included screws, washers and a backplate from the back of the Mainboard. Make sure to also only hand-tighten these screws and to do so evenly.

Technical specifications main waterblock:
Dimensions baseplate: 181 x 198 mm
Overall size without fittings: 181 x 198 x 13/20mm (L x W x H without fittings)
Weight: ~454g
Baseplate material: 4mm pure copper (nickel plated)
Top plate: POM black 2/3 x 6mm
Connection threads: G1/4´´

Technical specifications Mosfet waterblock CPU0:
Dimensions baseplate: 88 x 32mm
Overall size without fittings 88 x 32 x 14 mm (L x W x H without fittings)
Weight: ~111g
Baseplate material: 5mm pure copper (nickel plated)
Top plate: POM black 7mm
Connection threads: G1/4´´

Our waterblocks are always shipped without fittings, please order any required fittings separately!

Extent of delivery:
1 x EVGA SR-2 Quadchip waterblock Nickel POM including 2 spacer rings, backplate and mounting kit
1x EVGA SR-2 Mosfet waterblock CPU0 Nickel POM including 2 spacer rings, backplate and mounting kit