With this waterblock kit we offer the perfectly tailored cooling solution for the ASUS P6T7 WS Super Computer Mainboard.

On this Mainboard the Southbridge, Northbridge and the NF200 Chips as well as RAM&CPU VRM modules are cooled by one heatpipe. This heatpipe only works properly with the airflow from a large CPU cooler. We hence strongly recommend cooling the Chipsets , NF200 Chips as well as VRM modules with water if you cool your CPU with water. This enables stable operation even when overclocked!

With our new Quad-Chip waterblocks it is possible to cool Southbridge, Northbridge as well as the NF200 Chips with one waterblock which offers you the following advantages:

• No more fittings in the expansion slot area, all slots are fully operable with this waterblock!

• Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.

• The distance between the threads even allows the use of High-flow fittings

• In combination with our RAM and CPU VRM waterblock for the ASUS P6T7 WS Super Computer all heat-sensitive elements are cooled with an uniform design!

This waterblock is the perfect expansion your you if you are already using a watercooled system.

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during  installation of this product and will not be liable.

Recommendation: For protection of the open X58 Northbridge we recommend to order the protective pad 31059 & 31060. Please make sure to use only non-conductive thermal compound such as the Arctic MX series!

Please note: The quadchip waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evely and avoid overtightening! For the Chipsets as well as the NF200 Chips please use a non-conductive thermal compound such as the Arctic Cooling MX 2/3 series. For the two chips left to the fitting area please use the included thermal pads! The Mosfet waterblocks are also mounted with the included screws and washers from the back of the Mainbaord, please also ensure even tightening and avoid overtightening! For the VRM modules we recommend using the original thermal pads of the heatpipe or use an equivalent product.

Technical specifications Quadchip waterblock:
Dimensions baseplate: 153 x 165 mm
Overall size without fittings: 153 x 165 x 8/16mm (L x W x H)
Weight: ~200g
Baseplate material: Pure copper 3mm, nickel plated
Cover material: POM black 8mm
Connection thread size: 1/4´´

Technical specifications VRM waterblock 1:
Dimensions baseplate: 80 x 16mm
Overall size without fittings: 93 x 20 x 17mm (L x W x H wihtout fittings)
Weight: ~123g
Baseplate: Nickel plated copper 5mm
Middle plate: POM black 6mm
Top plate: POM black 6mm
Connection thread size: G1/4"

Technical specifications VRM waterblock 2:
Dimensions baseplate: 67 x 16mm
Overall size without fittings: 78 x 20 x 17mm (L x W x H without fittings)
Weight: ~60g
Baseplate: Nickel plated copper 5mm
Top plates: POM black 8mm
Connection thread size: G1/4"

Our waterblocks are always shipped without fittings, please order fittings separately if required!