However, the noble cube convinces not only by externals, but thanks to support for ATX or even E-ATX motherboards suitable to 272 mm width also ideal for very high-performance components that can be put in the limelight thanks to the large viewing window.
The Lian Li PC-O9WRX ATX case at a glance:
ATX case with dual-chamber design
Right chamber aluminum & left chamber of tinted tempered glass
Space for motherboards up to E-ATX form factor
Five preinstalled 120 mm fans
Space for lush Hardware & extensive water cooling
Integrated RGB LED illumination for front Logo & Interior
Stylish Cube chassis with numerous refinements
Lian Li has again upped the ante with the PC O9WRX an optical shovel. The cube-shaped housing is presented with zweigeteiltem chamber design and is on the right side of high-quality brushed aluminum in black, whereas the left chamber to the side and the front is equipped with tinted tempered glass, thus allowing spectacular views of the installed hardware. both chambers are optically separated again by a red stripe in the middle of the housing, which also holds ready with four USB 3.0 ports, HD audio ports, and power button on the lid, the I / O panel.
Such an impressive body would naturally also be optimally presented. For this reason, Lian Li has already installed an RGB LED lighting with handy RGB controller at the back of the cube. This allows the LED strip within the housing, and the "Lian Li" logo on the front, color in every desired color.
Air and water cooling options in PC O9WRX
The stylish cube with proven dual-chamber design is factory-fitted with a total of five 120 mm fans. Three of them are placed in parallel with the motherboard tray in the middle of the housing. They suck the air of the left ventricle and to blow it into the right. Alternatively, you can install up to a length of 360 mm at this point radiators. Buyers should here but make sure that ever shortening the maximum length for video cards of 420 mm to 290 mm on the thickness of the radiator. Since the cube for a water cooling system, however, is particularly well suited, Lian Li has directly integrated a practical holder for pump or surge tank in the front floor area.
The two remaining pre-installed 120 mm fans are located between the housing backplane and HDD tray of the right ventricle. The Airflow designed thereby as follows: The air is drawn in through the bottom of the left ventricle and blown by the three fans at the MB tray into the right ventricle. the air to the hard drives is Once there passed by the two 120-fan outwards. For that extra bit of cooling capacity three more 120mm fans can be installed in the lid. Alternatively, can block with a length of up to 360 mm at this point radiators. In addition to the dust filter at the bottom, there is another in the lid and the mesh grid of the right side wall. All of them to clean very easily removed and as easily.
Generous spaciousness for Hardware
The PC O9WRX-Cube uses the innovative dual-chamber design not only for optimum cooling, it creates by the interior with two mutually separate regions mainly plenty of space for potent gaming hardware. The left pane is reserved for motherboard, graphics card and CPU cooling or water cooling components, while all media, cable and the ATX power supply is shifted to the right pane. The latter must be there all the 290 mm long and a modular HDD cage takes six 3.5-inch drives and two 2.5-inch HDDs / SSDs. The left area on the other hand houses the nice looking system components and can accommodate up to 420 mm long graphics cards (without thick heat), CPU cooler with a maximum height of 160 cm and motherboards up to E-ATX form factor, which has a maximum width of 272 cm.
Technical details:
Dimensions: 354 x 482 x 465 mm (W x H x D)
Material: brushed aluminum (chassis), tempered glass (front, side panel)
Weight: approx 8.6 kg
Black / Red
Form Factor: E-ATX (up to 272 mm wide), ATX, Micro-ATX
Fan total possible:
3x 120 mm (interior, left pane)
3x 120 mm (cover, left pane)
2x 120 mm (HDD tray, right pane)
Of preinstalled:
3x 120 mm (interior, left pane)
2x 120 mm (HDD tray, right pane)
Radiator Mountings (without fans slots):
1x 360/240/120 mm (interior, left pane)
1x 360/240/120 mm (lid, the left pane)
Filter: cover, front, side
Drive Bays:
6 x 3.5-inch drives
2 x 2.5-inch drives
PSU 1x standard ATX (optional)
Expansion Slots: 8
I / O panel:
4x USB 3.0 (internal connection)
1x per Audio In / Out
Power-On / Off switch
LED Interior Lighting:
LED Strips (RGB) in the interior & "Lian Li" logo on the front
1x LED Controller (rear)
3x knobs for color selection (back)
Maximum video card length: 420 mm (290 mm with very thick radiators)
Maximum CPU cooler height: 160 mm
Maximum power supply Length: 290 mm