Lian Li PC-O12WX Miditower - black Window [PC-O12WX]

The features of the PC-O12WX Midi-Towers:

Noble combination of aluminum and tempered glass
Riser Card cable for vertical graphics card mounting
Space for mainboards with E-ATX, ATX or Micro ATX form factor
Spectacular two-chamber design
4x 3.5 "HDDs & 4x 2.5" SSDs
Frontpanel with 2x USB 3.0 Type-A & 1x USB 3.1 Type-C & 1x HDMI
Graphics cards up to 34 cm in length
Space for a 360 mm radiator and a 280 mm radiator
Up to five 120 or 140 fans
ATX housing with noble design: brushed aluminum meets Tempered Glass

With the PC-O12WX, brushed aluminum is skillfully combined with sides of tinted Tempered Glass (hard glass). Lian Li goes a step further and equips the front of the ATX case with hard glass. The housing cover is brushed aluminum and houses the front panel with one HDMI and USB 3.1 type C connector, two USB 3.0 ports and the two mandatory audio connectors.

The left-hand enclosure can accommodate four up to 340 mm long graphics cards with vertical mounting using riser card cables. In the right-hand chamber are found maximum E-ATX format and CPU coolers up to 75 millimeters in height. For the installation of a custom water cooler, the case offers the possibility to install up to two radiators. One up to 360 millimeters in the lid and a 280 millimeter model in the front.

These radiator positions can, of course, also be occupied only by fans, taking three 120 mm fans in the lid and two 120 or 140 mm fans on the front. For AIO watercooling kits, due to the special design, sufficient cable length should be considered. The lower chamber accommodates the hardware, which hardly radiates heat and does not have to be cooled particularly. In addition to the ATX power supply and plenty of space for cable management, you can store data here.

Two modular HDD racks are used to mount said data memories. In these racks, two 3.5-inch HDDs and two 2.5-inch SSDs can be installed. In total, four 3.5 "and 2.5" data carriers can be mounted. Cool air penetrates the Lian Li PC-O11WGX through the corrugated floor panels into the housing. Due to the chimney principle, the warm air rises upwards, where it escapes through the lid.

Technical details:
Dimensions: 203 x 508 x 550 mm (W x H x D)
Material: brushed aluminum (chassis), steel (interior), hardened glass (front, sides)
Weight: 8.6 kg
Color: Black
Form Factor: E-ATX, ATX, Micro-ATX
Total fan possible:
3x 120 mm (cover)
3x 120 mm or 140 mm (front)
Radiator mountings (dispensing with fan slots):
1x max. 360 mm (cover)
1x max. 280 mm (front)
Drive Bays:
4x 3.5 Inch Drives (Internal)
4x 2.5 Inch Drives (Internal)
Power supply: 1x ATX (optional)
Expansion slots: 2
PCI-E Riser cable: 1x PCI Express 16x (440mm)
I / O panel:
1x HDMI
1x USB 3.1 Type-C (internal connection)
2x USB 3.0 Type-A (internal connection)
1x each audio in / out
On / off switch
Maximum graphics card length: 340 mm
Maximum CPU cooler height: 75 mm
Maximum net length: 230 mm