Lian Li PC-B16 Midi-Tower - black [PC-B16]

First and directly externally visible action to the front door , on the one hand gives the front an easy - clean look , but also the noise from hard drives , fans, and other components Trail T from leaking to the front. If you open the lockable door, so one sees the inside of the mounted therein insulating mat , which also enhances the effect . More insulation mats are advanced for the PC -B16 in the right and left side part and finally to insulating material is also below the mesh area of ​​the lid .

The two have already been installed at the front and fitted with dust filters 120 mm fan sucking the air required therefore across the vents in which are embedded right and left in the Front Door . The PC- B16 Lian Li has already factory fitted very neat when it comes to air cooling , because the two front fans are joined by a further 120 on the rear position. An optimum airflow from front bottom to top back is given with it. In addition, up to two 140 - 120 mm models are mounted in the lid or .

Here, a cover panel is easily removable without tools , and then remove the local insulating mat . In this way, you can also access to the easy to clean removable dust filter in the top position. Filtered way, is also the Airflow access under the power supply behind the bottom of the case. Its basic design, the Lian Li PC -B16 is thus a relatively conservative housing candidate for ATX , Micro- ATX and Mini - ITX boards , whose strengths - apart from the obvious Dämmungs advantage - emerge in detail.

So Lian Li PC -B16 sets the example, a new modular mounting , the drive carrier for 3.5 -inch and 2.5 -inch disk. While behind the motherboard tray , an additional space for a small screw drive is present, up to six hard drives or SSDs can be accommodated on each with its own carrier in the front area of the tower. These carriers can now be individually flexible mount on the extended motherboard tray. This means a maximum modularity :

If you want to use fewer drives , you can instead make the draft more freely . Or do you manage to use the existing works 28 cm of space for a graphics card extra space and can then block cars to theoretically 42 cm. More, even the 5.25- inch drive bay is removable to it simply to put the hard disks to the top. However, a 5.25-inch slot is always maintained . Without ODD Cage and drive carrier is also the option to place a water cooling radiator in the front opens .

Then even triple radiators go inside (within 360 mm). A second radiator mounting can be done either in the lid, where dual heat exchanger ideal for up to 240 or 280 mm in length and up to 3 cm thick. Along with the many tool -less solutions , the four concealable with a flap USB 3.0 ports in the lid, the factory noise insulation , the three pre-installed fans and 3 cm of space behind the tray for cable routing arises when Lian Li PC -B16 the image of a very powerful , noble , practical Silent mid-tower .

Technical details :

    Dimensions: 230 x 490 x 530 mm (W x H x D)
    Weight: about 6.5 kg
    Material: Aluminum (brushed)
    Color: Black
    Form Factor: ATX, Micro -ATX , Mini -ITX
    Fan total possible :
    2x 120 mm ( front)
    1x 120 mm (rear)
    2x 140/120 mm ( lid )
    Of preinstalled:
    2x 120 mm ( front)
    1x 120 mm (rear)
    Radiator Mountings (partial waiver of fan slots) :
    1x max. 360 mm ( front)
    1x max. 120 mm (rear)
    1x max. 280/240 mm ( lid)
    Filters: front cover , power adapter (removable)
    Drive Bays:
    4x 5.25 inch ( external; tools )
    6x 3.5 / 2.5 inch (internal , 3.5 in. tools )
    1x 2.5 inch ( internal)
    Power Supply: Standard ATX 1x (optional)
    Expansion Slots : 7
    I / O panel :
    4x USB 3.0 ( internal connector )
    1x each Audio In / Out
    Maximum graphics card length : 280 mm ( without any disclaimer)
    Maximum graphics card length : 420 mm (without drive at this level )
    Maximum CPU cooler height : 170 mm
    Maximum PSU length: 280 mm