Lamptron CM430 PWM fan controller - black / green [LAMP-CM430BG]

The key features of the CM430 fan control include:
    High quality aluminum housing
    LCD touch screen with green illumination
    Four channels, each with 30 watts of power
    Connections for 3x 3-pin & 1x 4-pin fan
    included four temperature sensors
    Automatic or manual control

Design & installation of CM430 fan control
The CM430 fan control of Lamptron can be quickly and easily screwed into a 5.25-inch slot. Thanks to the four screws it has a secure grip and added the computer to a practical solution for the regulation of developed fan. The black frame impresses with its appearance of brushed aluminum and borders the green glowing LCD touch screen perfectly.

It can be connected three standard (3-pin) and a PWM fan (4-pin), the latter could also be replaced by a standard fan. The scope of supply also includes in addition to the 4-pin cable and the three 3-pin cables total of four temperature sensors. the fan controller is supplied with power via a 4-pin Molex connector, which in turn is not included.

Functions of CM430 fan control
The display of fan control provides a range of information and configuration options. In addition to a Power-On / Off switch can be found on the right side of the option between the four available channels to change. The currently selected channel is also shown again great. The center of the display shows the current speed of the fan in the form of a tachometer. To the left are the temperature and a changeable speed, voltage or percent display.

The CM430 fan control still offers an opportunity to make all the settings manually or to select automatic operation. In addition, the brightness of the illumination can be adjusted in three levels (100%, 50% or 0%). After switching on the fan control the lighting by default is set to 100%. In automatic mode, it switches itself off after three minutes.

The CM430 is also equipped with an alarm function, which can warn the user at too low or too high a temperature. This function can be quickly and easily configure and disable or enable as easily. Likewise, between "Quiet" can - and "Full Power" mode to be changed, according to the requirements of the cooling.

Note: On the three 3-pin connectors can be connected instead of standard fans and 4-pin PWM fan. However, these can then only be regulated via the voltage.

Technical details:
    Dimensions (overall): 148.5 x 42.5 x 63 mm (W x H x D)
    Dimensions (LCD): 129 x 32.5 mm (W x H)
    Compatibility: 1x 5.25 bay
    Black (Housing), Green (light)
    Fan channels: 4 (max 30 W per channel.)
    Voltage: 0 - 12 V DC
    connectors:
    1x 4-pin Molex
    1x 4- or 3-pin fans
    3x 3-Pin fan
    4x 2-pin Temperature Sensor
    Delivery:
    1x CM430 fan control
    1x 4-pin fan cable
    3x 3-pin fan cable
    4x 2-pin Temperature Sensor
    4x screw