The Laing D5 with a different approach:

Besides the standard elements of the Laing D5 (Item 49 029) Which are have been known for years this "solar" version has additional features: Besides the extremely long life span and the low noise emissions thanks to a unique bearing design this version therefore has to extremely low starting voltage as it was designed for operation with solar panels. The low starting voltage Allows the user to run the pump at very low speeds whilst still plenty of Maintaining flow. The pump has a current draw of 0.25A-1.45A (Important: Check compatibility of the sockets), Allowing both absolutely silent operation and powerful use of the same pump when controlling the pump's speed via a fan controller.

This pump is perfect to give you the choice from two extremes and anything in between!

Technical specifications:
Dimensions: 90x90x90mm (without fittings)
Motor design: Electronically commuted ball engine
Nominal voltage: 12V DC
Max power consumption: 22W
Current draw: 0.25-1.45A
Voltage range: 8-14V
Pressure head at 12V: 3.7m
Maximum flow: 1500L / h
Supported in any media: Water / glycol mixtures
Maximum system temperature: 95 ° C
Materrials in contact with medium: stainless steel 1.4571, PPS-GF40, EPDM O-rings,
Aluminum oxide, hard coal
Connection threads: 2x 1 / 2 "inside threads

Extent of delivery:
1x Laing D5 pump12V D5solar-38/700

Mounting system not included

Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components Do Come not in contact with water during installation or when working on the pump. When replacing the top always Ensure a proper fit of the O-ring seal and avoid spills when filling the reservoir Laing. Damages due to water in the electronic components are not replaced by Laing!

Please note: The power cable of the pump is not equipped with a plug. We hence recommend to order system no. 82 021 for connection of the unit. The image gallery shows the cable / pin order