Laing D5-Pump 12V D5-Vario 1/2 IG [6055E0000/9500041]

Overview

This pump is ideal for water cooling of processors and electronic components. Due to its size and power can be used in a variety of applications beyond. This pump is an electronically commutated spherical motor pump, with running times of more than 50,000 hours at 12 volts. The only moving part in a spherical motor pump is a spherical rotor / impeller unit, which sits on an ultra-hard, wear-resistant ceramics bearing ball.

5/5 | 1 Reviews | Write your Review

Stock, Shipping & Collection Options

2 Available for Next Day DeliveryVia Express Shipping 50+ Available Delivery in 3-5 Days

FREE UK/EU DELIVERY over £500+

2 Available for Collection

SKU: 49029

MPN: 6055E0000/9500041

EAN: 4049469006990

Warranty: 12 Months

£204.25 inc VAT

Details

A conventional shaft with bearings and shaft seals is not available. The spherical bearing of the rotor / impeller unit on the ceramics bearing ball provides a lot of advantages: The development of bearing play - and thus a noise increase - is not possible on principle. The pump is silent over the entire term. The bearing is self-adjusting. It is lubricated directly by the delivery medium (wet-running pump).

No need for maintenance. Since the rotor is always held magnetically in the intended position, smaller particles pose no problem. Blocking of the pump is not possible under normal circumstances. Even after prolonged shutdown is given a safe start. The permanent magnetic rotor / impeller is driven by a magnetic field produced by the surrounding stator. This is built entirely around the rotor.

The entire pump is thus with 38 mm only slightly higher than the stator itself. It easily fits in all standard PC, Barebone and Mini PC cases. A separate magnetic shielding is not necessary in most cases. The ball motor principle enables an economical enterprise with comparatively high achievements. By voltage variation, the DDC direct current pump can easily be adjusted over a wide power range. All wetted parts are corrosion resistant. This pump has a regulator and is adjustable in 5 steps VonB 1800-4800 rev / min.

Specifications

Dimensions (WxDxH) 90x90x90mm (without fittings)
Motor: Electronically commutated spherical motor
Rated voltage: 12 V DC direct voltage
Power consumption: 23 W
Zul. Voltage range 8 to 24 volts
Pressure head at 12V: 3,7 m
max. Capacity: 1500L / h
Fluids: water, water / glycol mixtures
. Maximum system temperature: 95 ° C
Wetted parts: Stainless steel 1.4571, PPS-GF40, EPDM O-rings,
Aluminium oxide, hard coal
Connectors: 2x 2.1 "internal thread
Features: This pump is adjustable in 5 steps
P1 = 1.800 U / min
P2 = 2.550 U / min
P1 = 3.300 U / min
P1 = 4.050 U / min
P1 = 4.800 U / min
It has the rear end of a regulator.

Important: The Laing pump's electronics are not waterproof. Please make surethat the electronic components do not come into contact with water falling on installation Or When working on the pump. When Replacing the top always Ensure a proper fit of the O-ring seal and avoid spills When filling the reservoir Laing. Damages due to water in the electronic components are not Replaced by Laing!