Koolance Pump Nozzle and Reservoir Base for PMP-400 (Laing-DDC-Pumps) [COV-RP400]

Two important elements are ensured by this coupling piece:

1: The optimal connection to the pump must be ensured. By removing the standard Laing top and mounting this top a proper connection between the first two basic components is ensured. This top can also be used without a reservoir tube. One inlet is integrated into the top, which usually sucks in the coolant from the reservoir. Another inlet is integrated into the side. An included screw cap allows sealing of the unused inlet.

2: The connection to the reservoir is ensure. This is done using the well-known principle of standard bottom pieces. Using the included "Koolance reservoir coupler" the union is easily achieved. This is a well-proven principle and promises a safe seal.

On top: A chrome-plated mount for the pump and the reservoir for mounting in a 120mm fan opening.

Technical specifications:
Material: Main body: Acetal, Screw plug: Nickel plated brass
Height top: 26mm
Connection thread size: 1/4"
Tube diameter: 58mm
Hole spacing mount: 105mm

Extent of delivery:
Koolance Pump Nozzle & Reservoir Base for PMP-400 (Laing-DDC-pumps)
Mount
Mounting material
Koolance Reservoir Coupler