The Innovatek i7 CPU waterblock was developed especially for the Intel Socket 1366 and is optimized for the corresponding CPUs and socket system The massive full-metal water block is tightly secured to the motherboard by an installation.
Thanks to the internal design design Which is based on the G-Flow and which furthermore improved and optimized for the CPU cooling Corei7 performance has improved massively and marks the peak of current water block.
The massive water block weighs almost 700g 10x10cm and is large!

The i7 which, as all Innovatek water blocks, designed for optimal usage of the cooling medium (cooling water). Even at low flow rates it already provides maximum cooling performance. It also is almost no obstruction to the flow of coolant, making it perfect for high-flow systems.
The Innovatek Therefore i7 does not have high cooling loop requirements. Flow rates can be consistently sustained as the water block can not clog under normal usage conditions.

The extremely large copper core of the i7 water block was specially designed Fri Socket 1366 CPU And Therefore enters new dimensions of cooling performance. The massive core is inseparably connected to the all-metal casing of the block and has a perfectly flat and polished surface. It therefore Allows perfect contact to the CPU to most efficiently dissipate heat from the core.
Build quality and performance of the i7 water block stand up to the highest standards and the design sets new standards as well.

Of course even the invisible cooling plate Which sits on the CPU is perfectly flat and polished and made of pure copper to Ensure perfect contact to the CPU.

Features:
High cooling performance
Full-metal design (made purely from metal!)
Optimized for Core i7 CPUs
No channel necks - No clogging of the water block!
Cooling performance sustained permanently
Full cooling performance even at minimum flow rates of only 0.3 l / min
No special pump required!
Easy and simple application
Beautiful all-metal design
Thread Size: G1 / 4 "
Incl. Mounting system and back plate for Intel Socket 1366 (Core i7)

Extent of delivery:
Fully mounted water block
Thermal compound (Silmore)
2 fittings (straight - with soft seal) suitable for hoses 10/8mm

Note: Please use only distilled water in combination with Innovatek Protect IP / PRO as coolant! Prevent the water block from having any contact with methanol or ethanol! This could permanently damage the water block!

Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!

This product has been reviewed for you:
Cooler master