Innovatek i-COOL P4 holding system of art. Rev3.0 / Rev4.0 / V6 [500584]

Through the use of optimal materials and sophisticated technologies attachment is always reached the maximum pressure in complete safety for the CPU. This attachment security is ensured even over long periods of time and the full pressure is maintained. Nevertheless, the brackets are just as easily and as often as you disassemble.

Innovatek All restraint systems to the CPU coolers are compatible with each other. I.e. if you change the base system, you only need a new support system and no new radiator. They include all necessary parts for assembly, such as motherboard backplates as specified by the CPU manufacturer or screws and any tools, etc.

The P4 holders are made of fiberglass-reinforced synthetic material and the use of the CPU cooler to enable Intel P4 CPU's. The socket 478 brackets are based on the existing retention module on the board, and work on the same principle as the original Intel CPU cooler. The installation is very simple and straightforward: Put clip by moving levers .. done! The cooler sits rock solid and not swivel on the CPU.

Features:
ease of use
safe and optimal positioning
100% accurate, according to preset pressure of the CPU vendor
Long-term stability - the pressure is maintained throughout the operating period
Reliable protection of your CPU
professionally designed according to the original specifications of Intel

delivery:
P4 mounting system made of fiberglass reinforced plastic specialty