The new, highly optimized flow of the Innovatek XX-Flow rev2.0 (Double X) reaches extreme cooling performance. The cooler has compact dimensions and superior craftsmanship. The pure copper base plate is made of nickel, the composite housing made from special plastic with a reinforced frame. As a visual treat, the cooler is supplied with a black composite housing.
Innovatek XX-Flow rev2.0 represents the logical development of the best X-flow flow principle dar. With up to the physical limits of optimized flow control have been achieved on the XX-Flow rev2.0 (Double X) new performance. Nevertheless, the cooler has a compact size and low weight.
The special outer skin of highly resistant special plastic produced in conjunction with the special base module even better turbulence of the cooling medium without cross-section. Innovatek XX-Flow CPU Cooler is therefore (and even the X-flow) no special requirements for pump or cooling system. Furthermore, the flow remains the case inasmuch as it does not clog the radiator.
The special (and patented) innovatek countercurrent flow technology has been optimized for XX-Flow CPU Cooler to the limit. What indicates the name of the cooler, the cross-flow principle was almost doubled, thus increasing the efficiency again. Unlike the X-flow at the outlet of the condenser is thus no vortex flow more visible.
This special interior design, which has no moving parts, uses the heat capacity of the cooling medium out absolutely perfectly, allowing extreme cooling performance. Nevertheless, the flow cross-section is not restricted and therefore not even the flow of the coolant disabled. This helps to ensure the pump is not burdened by an increased flow resistance, and the cooler block can not continue.
The laminated specialty plastic used together ensure the base module of high-purity nickel-copper electrolyte optimal Korrossionsfestigkeit. Naturally, the visible underside of the cooler soil, which rests on the core, and high-quality generic plan, which provide a perfect contact is ensured to the CPU. Only a few thousandths of a millimeter thick nickel special coating guarantees an even smoother surface than pure copper, and therefore improves the thermal properties of the cooler addition. The cooler comes standard with 8 / 10 mm Screw-in (even - with soft seal) supplied (removable - G1 / 4 "thread) These connections are suitable for 8 / 10 mm (8 mm inner / 10mm outer diameter) tubing (PVC, PU, etc. .)

 Technical data:
. Length:. about 64 mm
. Width. about 64 mm
. Height:. 20 mm
. Weight:. approximately 305 grams
. Material. Copper

Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!