The Innovatek high-end radiators combine small dimensions with maximum cooling performance. They are available in a single-or dual-fan version. The (additionally required) 120mm fans allow extremely silent operation with outstanding cooling efficiency.

The radiators are shipped including replaceable screw-on fittings for hoses 10/8mm - as all Innovatek water cooling components.

The fine geometry of the radiator fin Allows better heat transfer to the air without Significantly obstructing airflow. The airflow from the cooling fans is used even more efficient than on other radiators due to the fan shroud on the radiator Which Allows a more even distribution of the airflow over the radiator, furthermore increasing cooling performance. The better distribution of airflow thus reduced flow noise - the radiator is very silent Therefore.

The fan can be mounted on both front and back of the radiator. The radiator itself has multiple mounting possibilities and can be installed in virtually any position within the PC case.

Even though Innovatek radiators may look similar to other radiators they have significant technical differences. The special, very costly, production method Allows the radiator to be''all of a piece.'' Therefore the time span fins and coolant channels have no separation Which results in optimum cooling performance over an unlimited. This method is unique and in the PC water cooling sector it is only applied to Innovatek radiators.

Another innovation is the flux-agent free production of the radiators, Eliminating possible residues within the radiator Which may damage the water cooling system

Please note: The radiator is shipped without installation screws for the radiator or fans. The holes in the radiators have a diameter of 4.5 mm.

Note: For further screwing of the screws can damage the radiator! Please note the correct length. Not all of the screws supplied are appropriate.

Note: Please rinse before mounting the radiator once complete, so Fertigunungs and storage-related residues are not placed in their circulation.

Note regarding coolant use:
Different from Aquatuning's opinion that the customer should have a free choice of coolants, has the position that Innovatek Innovatek water blocks must only be used with Innovatek Coolant. Innovatek checks complained items for the coolant used and GeneRally rejects returns of items Which were used with another coolant.
Customers who have products from Innovatek in their cooling loop and are not using Innovatek Protect as coolant always loose their warranty and defects liability on their purchased Innovatek products!