The companies coming from Germany, EHEIM and Innovatek are characterized by their extremely high quality and workmanship known and have joined forces in the development of special pumps and components for cooling PC components together to cover the growing demand for customized cooling solutions are optimal. Following the previously introduced HPPS i - 12V High Power sees now with the brand new PCPS 12V pump, a new shoot in daylight.

Extremely compact dimensions, one for the most water cooling systems more than adequate power and the already built-in reservoir to the pump to a genuine all-rounder who plays very little mud and friends of PC cases in the cards.

The PCPS can be installed directly in the housing and is connected to a standard 4-pin connector from the power supply. Because of the costly and already installed in the housing electronics has this tiny compact very high life expectancy, one for current PC systems sufficiently high performance and yet a very low volume.

Despite the small size and the fact that the reservoir was previously installed in the pump, it reaches an elevation of 1.6 meters surprisingly good. The pump can be connected directly to the 12V rail of a power supply, so no additional cables are installed from the PC.

You can of course also influence the performance and the resulting noise. Which is where the cover off the engine body by slightly angling, the use of tools or excessive force is not obviously necessary. Four different modes, the new pump PCPS: Normal, Silent 1, 2 and Silent power - perfect for the pump with optional plug-in jumpers completely adapt to your needs.

In order not to impair the outstanding features of this pump, an extremely complex microprocessor control is used, which monitors and controls the pump depending on the choice of one of the 4 integrated programs. The PCPS start after switching to a lower pressure and then increases it gently in about 3 seconds to the preset operating pressure to give the mechanics and spared the life is extended significantly.

Note: Please only use distilled water in connection with "Innovatek Protect IP / PRO" as the cooling medium. Nor should the PCPS 12V pump be installed only vertically, horizontally or inclined operation is not possible. This product is supplied without the necessary G1 / 4 "connections, to provide you with the composition of your water cooling maximum freedom. Matching connectors and adapters can be found here.

Features:

    * Four different modes with optional plug-in jumper
    * Maximum height of over 1.60 m
    * Extremely low power consumption (about 3.8 - 4 W)
    * Quiet operation with soft start the pump
    * 12V operating voltage
    * Extremely Reliable and safe to use
    * Amess: 50 x 53 x 123 (W x L x H)

Delivery:

    * 1 pump with integrated reservoir, without fittings
    * 1 container lid with mounted gasket
    * 1x mounting plate
    * 1x German-language instructions

Pumps tested by Xpert-OC-Team

Tech-Review has tested this product for you.

Note: Tighten the pump adapter is too strong can lead to break the plastic covering. By contact of the O-ring and a slight rotation of the tangible tightness is already assured.

Try the aquasuite software in demo mode:
In our support area you can free download the latest version of the aqua suite software and start it in demo mode. In this mode, you can see, even without an existing aquastream pump their menus and display

Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!