Innovatek HPPS Plus - 12V Pump [500733-01]

Innovatek HPPS Plus 12V pump (innovatek / Eheim) is the latest generation of PC-pump technology dar. Although the optics and the outer appearance remained almost unchanged, compared with its predecessor a considerable increase of the pump power (up to 4m) and a extremely smooth operation and reliability achieved. The world's most advanced power pump for your water cooling. The HPPS Plus can not be compared with other 12V pumps, since the electronics of the HPPS Plus is much more sophisticated and has many additional features.

Features:
Extreme Power - Very high performance pump with enough pressure, even with very large water-cooling system pressure height 2.05 m +!
More power than a Eheim 1048! Programmable Silent and Power mode
Full ceramic bearing (special rotor axis and storage)
Extremely low power consumption (3W)
extremely quiet - improved smoothness with soft start the pump (inaudible)
Oscillation recognition with automatic restart
GENUINE 12V - no high voltage inside the pump (and even the HPPS)
Specially designed motor with extremely high efficiency
a continuous-Capable
Extremely Reliable and safe to use
CE certified!
The HPPS Plus pump is monitored and controlled by a microprocessor.
This micro processor controlled e.g. also the load and operating condition of the pump and controls the pump accordingly.
The pump has a very smooth running (almost noiseless)
Special bearings with ceramic shaft and bearing of the rotor. This storage is significantly different from the normal EHEIM storage and has a significantly lower clearance.
The various programmable modes of operation make the pump is fully customizable.
Compact and easy to use: There are no external modules needed, as the entire electronic system is already integrated in the pump.
extremely reliable - The pump has a soft start to protect the axle bearings.
Furthermore, the pump has a oscillation recognition with automatic restart of the pump in case of error.
The HPPS Plus pump has a specially designed motor with extremely high efficiency and low power consumption. That means your PC power supply is affected by the hardly HPPS Plus addition.
There is NO 230V connection longer necessary.
The power supply of 12V DC power directly via the standard 4-pin HDD/CD- drive power connector plug from the power of the PC directly to the pump itself
No complicated wiring required

Overview:
The newly developed HPPS Plus has even more power and refinement than the best, and now many thousands of times used HPPS pump. The performance was increased by more than 20% from 1.65 m to 2.05 m over head (For comparison: 1046 ~ 1.2 m / 1048 ~ 1.5 m head). Here, the power is still extremely low at typical 3W.
Furthermore, some additional features such as the "silent" and the "power mode" or the Quick Start function integrated. Except for the case is the example in HPPS plus a completely new design compared with the normal Eheim 1046th
This also means for example is the axis (full ceramic bearing) and the runner is in this stage of development only in the HPPS Plus (identifiable on the red wheel). The HPPS Plus is the most efficient and most sophisticated special water pump for PC cooling systems. CE certified!
(By innovatek and EHEIM)

Operating modes:
The HPPS Plus, for a specialist and special applications in addition to the normal mode, with which the pump is delivered (here Föderhöhe 2.05 m), via a "silent" and a "power" mode.

Silent Mode: In Silent mode the Microprozesssor changes in the pump, the control techniques of the drive so that the (onehin already extremely quiet) pump completely "silent" is. The pump is not more or less audible, but loses a bit of pump power (only about 1.65 m - but this is still more than sufficient)

- Power mode: In the power mode, the pumps operating at maximum applied voltage up to 4 m water column and independently determines the maximum possible operating point! (Note: Maximum operating voltage must lie)

- Normal mode (factory): This is the compromise between maximum performance and quietness. The optimal operation in all normal water cooling system because the pump is not audible, and yet has an extreme performance.

Details:
The HPPS Plus pump directly to the power supply of PC's are connected and there is NO 230V supply required! Complex laying of the power cable is eliminated and the pump is also automatically connected to the PC on and off. No external module or additional wiring is required to operate the pump.

In order not to impair the outstanding features of this pump, a hugely complex microprocessor electronics are used, which monitors and controls the pump. This pump is the ne plus ultra of the PC pump technology dar.

As the only official partner of EHEIM in this area, it was possible to combine both companies' technologies and to develop a revolutionary and groundbreaking products and to improve.

Tip for venting of the system:
without having to connect the motherboard and start the CPU - - For easy filling and bleeding the system serves the included ATX Jumper. This simply plugs into the ATX connector from the power section and start this without replacing the motherboard must be connected.

Explanation of how the HPPS Plus:
The peculiarity of the HPPS Plus pump is next to the extremely quiet operation and high reliability (and the 12V supply) in the special control through the built micro processor and thus the "intelligence" of the pump.
In contrast to the normal pump HPPS Plus is always on the prevailing environmental conditions (ie, the existing water cooling system), which yields the best performance.

This is the PC pump area unique and only possible with the HPPS Plus!

Function:
A normal pump always runs at the same speed (frequency) and the same performance. That is, the more components are in the cooling circuit, the further the capacity goes down as the resistance increases in the system. So there is power lost and the pump is not working optimally.
The HPPS Plus may react flexible, and adapt to the prevailing conditions. Thus, the HPPS Plus will always try in every water cooling system, the optimum operating point and the optimal capacity to achieve. This is when you start the pump individually determined by very complex measurements and adjusted. Depending on the system the pump will get stronger or weaker -> You adapts to individual!
That means that even with water cooling systems with many components, the flow rate remains almost the same and the noise is still audible.


Technical data:
HPPS Plus special centrifugal pump - designed and optimized for PC cooling systems.
Delivery head 2,05 m (more than a Eheim 1048!)
Leistungsaufnamhe typically 3W (5W max.) - Therefore extremely efficient and does not burden the PC power supply
Innovatek Eheim pump impeller MOD already integrated
electronic contact security
Soft start and oscillation recognition with automatic restart
Quick start function
Programmable Silent and Power mode
Special motor with extremely efficient efficiency
removable suction and pressure connections
a continuous-Capable
Full ceramic bearing of the rotor (wear nearly zero)
Ceramic shaft bearings mounted in special rubber
extremely wear-resistant and extremely quiet operation
hose from the pump outlet connection size: 10/8mm
Weight: ~ 500g
Size (with suction, without screw, without stand): ~ 130 x 55 x 65 mm (lxwxh)

Delivery:
HPPS Plus pump - special version with 4-pin power connector
Innovatek Eheim pump impeller MOD already integrated
ATX bridging plug for easy venting and start the pump without connecting the Main Board
Screw-HPPS / outlet on tube EHEIM 1046 8x1
Mounting foot (on three sides of the pump plugged)
German-language instructions

Note:
Absolutely avoid the contact of the cooler with methanol (colloquially Metylalkohol) or ethanol! This might damage the cooler irreparably! Use only products that are certified by Innovatek and corrosion protection products included!

HPPS MOD 2.1

Note: Tighten the pump adapter is too strong can lead to break the plastic covering. By contact of the O-ring and a slight rotation of the tangible tightness is already assured.

Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!