Overview
Innovatek Fill Level Guard For AGB-O-Matic
The level controller for the AGB-O-Matic is installed in seconds and reliably monitored the Flüssigkeitststand in the cooling system. For easy installation of the original cover of the AGB-O-Matic is replaced with the level indicator. The system has no electrical contact to the cooling water and is therefore working extremely reliable. The level switch is connected between just any fan and the motherboard (or the Fan-O-Matic Fan-O-Matic MICRO). Once the level is too low, the sensor indicates this and stops the fan speed of the fan. Thus, the level can be evaluated directly from the BIOS and there is no separate monitoring system.
Note:
Operates directly on the motherboard and can be read using the BIOS.
(System requirements: Any fan with speed signal output)
Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!











