Innovatek AGB-O-Matic Reservoir Blue []

AGB-O-Matic reservoir for EHEIM 1046/48 HPPS and all types
The AGB-O-Matic is used for simple filling and venting a water cooling system. It is plugged directly to the EHEIM / HPPS pump and a water reservoir is available directly from the pump - can suck in absolutely any position without bubbles - and by the special arrangement of the return run. The filling and venting does so quickly, easily and free of bubbles! The tank is made of high-strength engineering plastic and is, despite the compact size of about 50x56x120mm (lxwxh) a very large filling volume available.

Overview:
The AGB-O-Matic is the logical continuation of the legendary standard reservoir, introduced by the innovatek this venting and filling technique as a pioneer and has used for simple filling and venting a water cooling system. It is plugged directly onto the pump and provides a reservoir of water available from the pump can directly and completely free of bubbles.
Despite the compact size of about 50x56x120mm (lxwxh) provide a large fill volume available. Filled, the water cooling system after the installation easy and fast through the feeding tube at the top (yellow cap).

Features:
The AGB-O-Matic is made of extremely durable special plastic, is very compact and optimized for the pumps Eheim 1046 series (HPPS etc.) voted.
By default, the return with a screw-equipped 8x1. Through the 1 / 4 "thread but it is also fitted with various other ports and thus variable combined with various hose diameters.

Details:
The special arrangement of the return flow and the internal flow geometry of the AGB-O-Matic pump to suck the bubbles completely and the system is exhausted very quickly and effectively.
The flowing of the cooling circuit of cooling water (blue arrow) it is directed at pump inlet over, so air bubbles can not be drawn (red arrow) and the system thus exhausted very quickly. Furthermore, the intake point in the middle of the AGB-O-Matic is mounted so that the pump always draws from the water - no matter what situation is the AGB-O-Matic. An air intake is impossible.

The AGB-O-Matic can also be rotated to vent a full 180 degrees. The system to fill the pump running, simply close the Terms and tilt the entire computer (let the pump run on) or turn around and completely, for example also remove the radiator from all air bags too easy. The function of the AGB-O-Matic is fully intact.


Technical data:

Weight: ~ 110g
Material: high-toughness special plastic
Size (without pump): (lxwxh) 50x56x120 mm
standard equipped with screw 8x1 - straight
1 / 4 "thread

Suitable for:
HPPS
Eheim 12V
Eheim 1046
Eheim 1048

All based on Eheim 1046 Pump


Note:
Avoid contact of the container but not necessarily with methanol (colloquially Metylalkohol) or ethanol! This could damage the reservoir beyond repair!

Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!