IN WIN D-Frame 2.0 Design Big-Tower - black / gold [ D-Frame 2.0]

 The D-Frame 2.0 also features multifunction brackets that allow the installation of a custom water cooling can be implemented very easily. The D-Frame 2.0 is only available in limited numbers and was published for the 30th anniversary IN WIN's.
The features of the IN WIN D-Frame 2.0:

Extravagant design housing for enthusiasts
Four multifunction brackets for components
Easy installation of pumps & Conditions
Modular fan / radiator brackets
Radiators up to 360 mm
Open-air chassis for good airflow
Extremely powerful 1,065-watt power supply with window
D-Frame 2.0: Extravagant design enclosure with modular design

The D-Frame 2.0 is composed of a skeletal structure made of aluminum tubes which are strikingly painted in gold and black. The backbone is then completed with a motherboard tray and various brackets for multifunction brackets. Highly customizable, visually extremely unusual and extremely solid and strong.

The multifunction brackets, four of which are enclosed, can optionally be mounted in six mounts in the front and also include other components such as a reservoir or a pump in addition to storing data. This allows the D-frame are 2.0 to accommodate your specific needs.

For easy mounting, the front and upper part of the skeleton structure, after removing the side panels made of tempered glass, be removed in one piece by pressing a button. A further improvement to its predecessor, which has a lot of sense and hobbyists come to Good.
The hardware in the D-Frame 2.0

The connections of the main board, if this has been installed, point upwards, so where in a conventional case, the cover is housed. Accordingly, graphics cards are vertically upward, installed with the terminals. This can escape after the fire-principle through the open-air chassis waste heat from the graphics card.

The selected video card, or those who enjoy a number, which up to 41.5 cm long and up to 17.3 cm wide, which allows the installation of the largest pixel Boliden. For the cooling of the CPU on the motherboard with a maximum E-ATX form factor that, up to 165 mm high CPU cooler can be installed. Overall, the D-frame prepared 2.0 eight expansion slots in the cover.

The I / O front-panel is located on the right side of the housing and the terminals are arranged one above the other. In addition to three USB 3.0 ports of D-Frame 2.0 provides an interface type USB 3.0 Type C and has thus more than the moment. Besides the two HD audio ports here are the power and reset buttons and a status LED to find.

To keep the cabinet does not transmit vibrations, the entire support structure with black rubber decouplers is provided, which also simultaneously act as feet still on the ground.
Open-air chassis for good airflow and a custom water cooling

When D-Frame 2.0 is a so-called open-air chassis that is generously open to almost every page. However, both side walls are again provided with tempered glass to protect the hardware and not to be completely penetrate dust. A great advantage of very airy design is the huge cooling potential with security. With plenty of fresh air can be routed directly to respective components of course much airflow.

For this purpose, up to five 120 mm fans can be installed in the D-Frame 2.0, three on a modular 3-In-1 bracket and two more modular brackets can record more 120 fans. The modular brackets can be mounted in the front before or after the multi-function brackets in the ground or in a vertical position.

Alternatively, the modular brackets may take the place of the fan appropriately dimensioned radiators. So can be installed according to the specifications of two 120mm radiators and a large 360-mm radiator and pump and expansion tank (GTC).

Theoretically, and with a bit of experience can be accommodated in the D-Frame 2.0 even up to two 360mm radiators. This requires either the renunciation of the multifunction brackets or the proper handling of electrical tools.
Extremely strong 1065 watt power supply with a unique design in the delivery

As Jubilee Bonus IN WIN equips the H-frame 2.0 innately out with an extremely powerful 1065 watt power supply. The fully modular power supply is the first power supply at all on the side window of 4 mm thick tempered glass, which provides within the housing for an additional eye-catcher. Moreover, it is also equipped with a stylish LED lighting, which can be switched off if required, at the back of the power supply.

With an efficiency of ~ 92% and the extensive cable options also absolute high-end systems with multiple graphics cards can be operated without problems. The large 165 mm fan ensures an adequate cooling and is less than 25 dB volume pleasantly quiet. A switch on the power supply can be these fans keep even after switching the PC into operation, resulting in improved cooling and longer life can be guaranteed. The user has the choice whether the fan for 30 seconds, 60 seconds or turn permanently to. Of course, it can be switched off together with the PC.

The back of the power supply also has a USB port with quick charge function that supports Apple 2.4A and 2.0A Samsung Fast-Charge. Thus, their smartphones or tablets can load quickly even when the PC.

Technical details (housing):
Dimensions: 264 x 548 x 726 mm (W x H x D)
By thumb screws results in a width of 291 mm
Material: steel, aluminum, tinted tempered glass
Weight: 22.5 kg
Black / Gold
Form Factor: E-ATX (12 "x 13"), ATX, Micro-ATX
Fan total possible:
2x 120 mm (modular brackets)
3x 120 mm (A modular 3-in-1 Bracket)
Radiator Mountings (without fans slots):
2x 120 mm (modular brackets)
1x max. 360 mm (modular Bracket)
Drive Bays:
4 x 3.5-inch / 2.5-inch drives (on multifunction brackets)
PSU: SII-1065 W (included)
Expansion Slots: 8
I / O panel:
3x USB 3.0 (internal connection)
1x USB 3.1 Type-C (internal connection)
2x HD audio (in / out)
Power-On / Off switch
Reset button
Maximum video card length: 415 mm
Maximum video card Width: 173 mm
Maximum CPU cooler height: 165 mm
Maximum power supply Length: 210 mm

Technical details (PSU):
Dimensions: 210 x 180 x 86 mm (L x W x D)
Weight: 2,8 kg
Construction: completely modular
Fan: 165 mm (<25 dB)
Active PFC (> 0.9)
Form Factor: ATX12V V2.4, EPS12V V2.92
Life expectancy:> 100,000 h
Warranty: 5 years
Power: 1065 W
+ 3.3V: 24A
+ 5V: 24 A
3.3V + 5V: 125 W
+ 12V: 71.6 A (1000 W)
-12V: 0.3A
+ 5Vsb: 6 A
USB:
+ 5V: 3A
Extra Power:
+ 12V: 5.4 A
Connectors (modular):
1x 24-pin
2x 4 + 4-pin
8x 6 + 2-pin PCIe
10x SATA
9x 4-pin Molex
3x floppy