IN WIN 703 Midi-Tower - black / red [703 black/red]

The Black In Win 703 is a rock solid steel tower from the SECC, the closed right and appears to the left with a large acrylic side window, both of which are side panels slightly arched in the middle area to the outside and thus give a little more space of the hardware inside. So are, for example, processor cooler in tower design between Mainboardtray and Window Panel entire 165 mm available (spacers and motherboard including CPU socket are to be included!). However, the special optical finesse receives the In Win 703 by the front end, which is constructed in two parts. First, the black steel body ends with a red plastic panel that moves slightly inward and the sides of the air passages are integrated for the front fan.

Only then comes the highlight in the form of a cover plate made ​​of black aluminum, the back has the full width and seems therefore easily detached from the body. The aluminum has been finely brushed for a particularly sophisticated look and not only because of the red, revolving lines a real feast for the eyes. Above, the front end is then crowned by the silver "IN WIN" lettering. The view from above reveals how the connectivity of stylish Midi-housing look, here are namely two USB 2.0 ports and a fast USB 3.0 port for connection to an external hard drive, a USB flash drive or a smartphone ready. Of course, here the connection can also be made ​​to a headset.

The cover is designed completely closed when In Win 703, however, the Airflow concept provides a very well directed air flow from front to rear up in front. According to these two front mount 120, one of which is already pre-assembled, and back over the seven PCI slots waiting an illuminated with red LEDs counterpart to use. An additional 120-mm-square is located centrally at the bottom and is also filtered as the underlying power supply slot for PSUs, up to 17 cm and ohnen an extra floor fan can be 22 cm long with use of the fan slots even. Even with the graphics card is high-end Trump, because pixels bolide may extend over 40 cm, because between 5.25-inch and 3.5-inch cages, a gap was left.

In addition to an external (optical) drive or a card reader, a fan controller, or whatever the user hovers, also up to four hard disks can insert tools. The carriage alternatively also take each 2.5-inch SSDs by screwing, depending another small drive can be bolted to the cage or on the floor-fan space. In addition, two internal 5.25-inch bays are available that could be equipped for example with optional HDD decoupling frame. The many passages tray and the CPU cooler cutout can easily go out of hand, together with the quick release system of the PCI slots in the mounting hardware In Win 703 Midi-Tower.



Technical Details:

     Dimensions: 210 x 432 x 477 mm (W x H x D)
     Weight: about 5.4 kg
     Material: steel (SECC), aluminum (front panel)
     Color: Black
     Form Factor: ATX, Micro-ATX, Mini-ITX
     Fan total possible:
     2x 120 mm (front)
     1x 120 mm (rear)
     1x 120 mm (bottom)
     Thereof pre-installed:
     1x 120 mm (front)
     1x 120 mm (rear, red LEDs)
     Filters: ground, power supply (removable)
     Drive bays:
     1x 5.25 inch (external; no tools)
     2x 5,25 inch (internal)
     4x 3.5 / 2.5 inch (internal, 3.5 inch tools)
     2x 2.5 inch (internal, 1x instead of 120-mm-bottom fan slot)
     Power supply: 1x Standard ATX (optional)
     Expansion Slots: 7
     I / O panel:
     1x USB 3.0 (internal connection)
     2x USB 2.0
     1x per Audio In / Out
     Maximum PSU length: 220 mm (without bottom fan)
     Maximum PSU length: 170 mm (with bottom fan)
     Maximum video card length: 408 mm
     Mainboardtray distance to the side wall: 165 mm