EK Water Blocks EK-XRES 140 D5 PWM incl. Pump [3831109840818]

Overview

EK Water Blocks is one of the specialists among the manufacturers of high quality water cooling systems and offers a wide range of individual designs. The company is now well known and steadily expanding its services to other areas of watercooling.

Innovative developers are also in the water pumps because they do not put up with the default configurations, but to lend a hand, to adjust the most dissimilar products to the needs of a watercooling. This article is a reservoir that is supplied with lid and a D5 pump. According to the manufacturer, the hydraulic power presentation will be higher by 15 percent over a Laing D5 pump.

0/5 | 0 Reviews | Write your Review

Stock, Shipping & Collection Options

Out Of Stock

FREE UK/EU DELIVERY over £500+

Collection is currently unavailable

SKU: WAEK-948

MPN: 3831109840818

EAN: 3831109840818

Warranty: 12 Months

This product is currently out of stock or EOL, please contact us for an ETA.

Check your hardware compatibility here

Details

The special plastic acetal forms the basis for the cover. In these will on the one hand the pump, screwed on the opposite side of the adapter, and finally the AGB. Rubber rings help to create the necessary seal. The feed can be done either over the head or the side of the tube, while the outlet on the side of the pump cover sits. All three ports have 1/4 inch thread.

The actual tube EK Water Blocks EK-D5 XRES 140 PWM consists of acrylic glass and gives a view of the inner EK Water Blocks logo free. The built-in pump is ideal for watercooling systems. The D5 pump is equipped with an electronic motor ball. This is held in the pump through a special ball bearings ultrarobustem ceramics. The pump achieves a maximum flow rate of 1,500 L / h and a head of 3.9 m.

Power is supplied via 4 pin Molex. In addition, the pump using an adapter to a PWM connector can be connected. The PWM control of the pump thereby enables automatic regulation of the speed. Shall be granted full power when needed or a silent operation in standby mode.

In addition, there is mounting delivery mechanisms and Universal holder EK-D5 UNI Holder V2, with which can also be mounted in a housing the product.

Technical details:

     Dimensions (total): 80 x 193 x 80 mm (W x H x D)
     Diameter (tube): 60 mm
     Material: Acetal / acrylic
     Color: Black
     Filling volume: 140 ml
     Connectors: 3x G1 / 4 inches
     pump:
     Head: about 3.9 m
     Maximum flow rate: 1.500 L / h
     Maximum system temperature: 60 °
     Operating voltage: 12 V
     Power Consumption: 23 Watts
     Pump connections:
     4-pin Molex (power supply)
     4-pin PWM adapter
     Ports: 3x G1 / 4-inch