 |
SKU: 17142 Warranty: 12 months |
Overview
EK Waterblocks solution for mounting various cooling!
A Simple but very effective system provides greater security and a much more sophisticated look in their system. Three successive stages to prevent the jam, for example the CPU cooler, and increases the pressure to 7.8 kg per screw, so to max. 30kg, which enhances the cooling capacity and provides a wonderful han in the assembly.
Level 1, which connect the motherboard mounting screws, no more tilt at the radiator mounting bolts. Level 2, a type of spacer between the motherboard and cooler holder, no over-tighten the mounting screws longer possible, the tilt of the cooler is prevented. Item 3, a cap nut covers the unsightly feathers and leaves the assembly of his cooler seem very appealing.
Technical details:
Material: brass, nickel plated
Color: Nickel
delivery:
- 8x M3 nylon washers (0.8 mm thick)
- 4x CPU locking nut M3
- 4x M3x8 Screws DIN7985
- 4x CPU M3 Thumbscrew
- 4x M3x8 mm springs
- 4x acetal spacers (2.1mm thick)
- 2mm Allen wrench
- Assembly Instructions
