EK Water Blocks EK-Supremacy EVO - Acetal + Nickel CSQ [3831109800157]

The lid is made in this version of black acetal in the CSQ-design, which provides excellent optics and at the same time opens up many modding options - including two preparations for 3mm LEDs. Thus, by looking at the interior of the top of the copper bottom visible, where 49 small pins provide an increased surface area to better dissipate heat to the water. Due to the optimized design more than 2.2 degrees can be achieved at lower temperatures the 2011 sockets as compared to the previous coolers thanks to higher flow rates.

Install using stable Backplates with all current sockets are supported by Intel and AMD. Thanks to Easy-mount installation is very convenient. All necessary for attachment to the motherboard screws and backplates are included. Moreover, the known of Gelid GC-Extreme thermal compound as is.

This product is supplied without the necessary connections. These are therefore sold separately.

Technical Details:

     Material: nickel plated electrolytic copper (ground), acetal (cover)
     Connectors: 2x 1/4 thread
     LED Preparation: 2x 3 mm
     Socket compatibility:
     Intel: 775, 1150, 1155, 1156, 1366, 2011
     AMD: 754, 939, 940, AM2, AM2 +, AM3, AM3 +, FM2, FM2 +
     Thermal paste: Gelid GC-Extreme


Attention: Please note that some coolers are supplied with a protective film on the bottom. These must be removed before installation and start-up in any case. We assume no liability for damages resulting from corrupted or incorrect installation and improper use!