Overview
The well-established manufacturers EK Water Blocks has also produced again in familiar high quality a cooler for the Radeon 6990 graphics cards. The visually appealing milled cooler is available in several variations, boasting excellent features such as worked very expensive floor tiles or the engraved logo on the lid. The block is attached with screws M2, 5 screws attached.
EN = New Nickelfilm
The cooling principle itself provides with its wide and narrow channels milled cooling fins on the GPU important component for good flow rates. A built-in cooler for the voltage converter rounds the whole thing back down from. This allows for stable operation at extreme summer temperatures, high Overclocking - potential and low noise at once.
This cooler is designed for highest demands. The contact surface of the cooler is flat and polished. The seal between the lid and heat sink made of a durable form of customized ring.
This cooler fits on ATI 6990 graphics cards.
EN = New Nickelfilm
Technical data:
Material: Acetal, nickel
Threads: 4 x G1 / 4
Delivery:
Cooler without connections (G1 / 4)
Mounting material
Thermal pads













