EK Water Blocks EK-FC R9 Nano - Acetal + Nickel [3831109830963]

The problem is exacerbated by its own overclocking, because then the temperatures can rise to harmful levels. In short: Who wants in games operation or even at a low setting Benchen and possibly simultaneously wants to turn the clock screw, comes barely past a water cooling. In addition to the usual components (radiator, pump, expansion tank) a suitable cooler for the graphic card is of course necessary to - as this model of watercooling specialists EK Water Blocks, which fits on the AMD Radeon R9 Nano in reference design.

There is a full-block design, which covers all relevant sources of heat the graphics card and thus effectively cools - ie the GPU, the HBM-memory and voltage regulators. This electrolytic copper and an optimized channel structure to be used to transfer the heat optimally. To better protect and personalises the copper was covered in this version with a silver nickel layer.

The lid is made of acetal, a robust and heat-resistant special plastic. The port terminal has four holes (G1 / 4-inch thread). The flat design of the radiator and the connection of multiple graphics cards in an SLI configuration is z. B. by EK-FC terminal problem (but without compatibility EK-FC Bridge or EK-FC Link). The height is limited - favored by the connection configuration of AMD R9 Nano - to a single slot, which is why the cooler enclosed with a single-slot aperture.

Notes: For integration into the cooling circuit connections are needed, which are not supplied. For one gram of thermal compound is already included (EK ectotherm) and thermal pads to make contact between cooler and graphics card. It is important to ensure that the cooler is designed exclusively for MSI graphics cards GeForce GTX 980 Ti type 6G Gaming in the custom design and with "Twin Frozr V" Cooler! The original cooler must be removed before installation, making the manufacturer's warranty expires!

Technical details:

     Material: Nickel plated electrolytic copper (ground), acetal (cover)
     Thread: 4 × G1 / 4 inch
     compatibility:
     AMD Radeon R9 Nano (Fiji LP, 4.096 MB HBM, reference design)

Attention: Please note that some coolers are delivered with a protective film on the bottom. These must be removed before assembly and start-up in any case. We assume no liability for damages caused by faulty or incorrect installation and improper use!