EK Water Blocks EK-FC R9-290(X) - Acetal+Nickel Rev.2.0 [3831109869031]

Overview

Peak power is bought with an equally top- heat development in the graphics card segment as before . Only if the clock screw turned all the way and the calculation units are used to the last segment , the decisive advantage over its competitors is to be achieved . Smaller feature sizes and more efficient layout can limit these problems though, but not completely off. For the next generation is expected to be required to the maximum.

AMD's flagship Radeon type R9 290 and R9 290X consume some energy and give appropriate power dissipation in the form of heat . The cards generate the reference design at higher loads, in addition to enormous power , unfortunately, eliminate noise .

0/5 | 0 Reviews | Write your Review

Stock, Shipping & Collection Options

Out Of Stock

FREE UK/EU DELIVERY over £500+

Collection is currently unavailable

SKU: WAEK-782

MPN: 3831109869031

EAN: 3831109869031

Warranty: 12 Months

This product is currently out of stock or EOL, please contact us for an ETA.

Check your hardware compatibility here

Details

So who in the Games operation or even when Benchen wants a low setting , and possibly at the same time wants to turn the clock screw , barely comes past a water cooling system. In addition to the usual components ( radiator , pump, reservoir ) , a suitable cooler for AMD Radeon R9 290X is this course necessary - as this model of watercooling specialists EK Water Blocks in the second revision. The updated revision now grants a previously given compatibility to some un Gigabyte MSI graphics cards models of the 290 and 290X .

It is still a full- block design , which covers all relevant sources of heat of the graphics card and thus effectively cools - so the GPU , memory and voltage regulators . Here are nickel plated electrolytic copper and an optimized channel structure used to transfer heat to the optimum.

The lid is made from acetal , a sturdy and heat- resistant special plastic. The connection terminal has four holes ( 1/4-Zoll-Gewinde ) to lead hoses from both sides to the radiator can . The undrawn threads are sealed with enclosed pipe plug . By this arrangement , the connection of multiple graphics cards is facilitated in a CrossFireX composite .

Notes: For integration into the cooling circuit connections are required, which are not supplied . Thermal compound is also separately acquire necessary to establish the contact between cooler and graphics card. In addition , make sure that the cooler is designed exclusively for AMD graphics card of the R9 290 and R9 290X reference design !

Technical details :

    Material: Nickel plated electrolytic copper ( ground ) , acetal (cover )
    Thread: 4x 1 /4 inch
    compatibility:
    AMD Radeon R9 290 ( reference design , Hawaii Pro, 4.096 MB)
    AMD Radeon R9 290X ( reference design , Hawaii XT , 4.096 MB)

Warning: Some coolers are supplied with a protective film on the bottom. These must be removed before installation and start-up in any case. In addition, the guarantee of the video card manufacturer for the dismantling of the original cooler goes out. All modifications done at your own responsibility! We accept no liability for damage resulting from incorrect or improper installation and improper use !