EK Water Blocks EK-D5 Vario Motor 12 Volt [3831109862612]

Innovative developers are also in the water pumps because they do not put up with the default configurations, but to lend a hand, to adjust the most dissimilar products to the needs of a watercooling.

This pump is ideal for watercooling systems. The D5 pump is equipped with an electronic motor ball. This is held in the pump through a special ball bearings ultrarobustem ceramics.

Power is supplied via 4 pin Molex. In addition, the pump via a 3-pin connector can be connected. The motor can be adjusted manually via the controller in five different speeds ranging from 1,800 U / min to 4800 rev / min.

The lifetime corresponds to 50,000 hours MTBF at 25 degrees according to standard temperature. The pump needs a matching lid, which is, however, available from EK Water Blocks in numerous versions and with different materials.

Technical details:

     Lifting height: 3.9 m
     Maximum flow rate: 1.500 L / h
     Operating voltage: 12 V
     Power Consumption: 23 Watts
     Rotation stages: 1800-4800 rev / min
     connections:
     4-pin Molex (power supply)
     3-pin fan connector
     compatibility:
     D5 compatible cover / reservoir from EK Water Blocks