Corsair Graphite 600 Q Big-Tower - black [CC-9011080-WW]

The title Graphite clarified already, that there is no tower in standard garb appear, but a housing with a precious finish in noble black. The front of the 600Q creates an unusual balancing act between classic and practical design and unusually-stylish elements. Unusually, in conjunction with the Graphite Clear 600Q way a winning combination, because by the inverted layout the motherboard is mounted on the left side of the Towers!
Inverted layout also leaves high-end graphics cards upside down

Corsairs choice to place the motherboard on the left, has an impact on the built-in hardware, because the motherboard is now almost on his head! Accordingly, the processor will be located in the lower part of the tower and the graphics card that can be up to 370 mm long, are installed on the processor including CPU Coolers.

The power supply unit is installed under the lid and is hidden behind a PSU-Shroud, so that annoying cable strands can be hidden behind the motherboard tray. In addition to space for cable management behind the motherboard tray space for three drive slots for 2.5-inch SSD, which can be mounted without tools.

Are also covered by the PSU Shroud the drive bays for two 5.25-inch bays in the front, hidden behind a flap which waiting to be used, and the two 3.5-inch slots which tools on the left can be side with hard drive-equipped. The mounting rails lie side by side and are rotated by 90 °, thereby providing a simple lateral access is guaranteed.

Factory blessed with sound insulation and good cooling performance
Three pre-installed, low-noise 140-mm fan AF140L with high air throughput ensure a superb airflow inside the case, which is not affected by drive cages. A three-stage fan control in the I / O panel on the lid of the 600Q allows manual adjustment of the fan rotation speed for the pre-installed fans.

The I / O panel on the left side of the cover includes in addition to the fan control four USB ports, two of which in the 3.0 and 2.0 standard come along, as well as the mandatory audio jacks. In addition to the quiet fans insulation in the front, the cover and the two side parts to contribute to that noise emissions by high-end gaming hardware can be greatly reduced.

If you want to expand this impressive body at a gaming PC with water cooling for the hardware, can look forward to comprehensive support for Radiatormountings. At the rear a 140mm radiator can be installed and available in the front dual radiators to 280 mm for a new home. The soil, so close to the processor, heat exchangers can be installed up to 360 mm. Thus, the Graphite 600Q is optimally prepared for AiO watercooling components or a custom water cooling.
The Graphite 600Q Big-Tower offers everything a gamer could want from a housing and impresses with elegant design, innovative internal structure, good airflow, three preinstalled silent fans, super Airflow, preassembled insulating mats, four USB ports in the I / O panel, a fan controller and extensive Mountings for radiators.

Technical details:
Dimensions: 260 x 535 x 454 mm (W x H x D)
Material: Steel
Colour: Black
Weight: 10 kg Form
Factor: E-ATX (12 x 10.6 inches), ATX, Micro-ATX fan: 2x 120/140 mm (front) 1x 140mm (rear) 3x 120 mm or 2x 140mm (floor) 1x fan control (3 levels) thereof preinstalled: 2x 140mm (front, AF140L) 1x 140mm (rear, AF140L) radiator Mountings: 1x 120/140/240/280 mm (front) 1x 120/140 mm (rear) 1x 120/140/240/280/360 (bottom) filter: front, bottom (removable) drive bays: 2x 5.25 inches (external) 2 x 3.5 inch (internal) 3x 2.5 inch (internal) Power Supply: Standard ATX (optional) expansion slots: 8 I / O Panel: 2x USB 3.0 2x USB 2.0 1x 1x fan control depending Audio In / Out Max . graphics card length: 370 mm Max Power Supply length:.. 210 mm Max height CPU cooler: 200 mm