Corsair Graphite 230T Midi-Tower - black / red [CC-9011036-WW]

The Midi-Tower offers but in addition to a stylish design and an extremely high level of functionality. To fit in the Midi-Tower Motherboard to enter into a form factor ATX. Of course, even Micro-ATX and Mini-ITX boards can be installed in the 230T. Inside the Midi-Towers is enough space for three 5.25-inch drives and four 3.5-inch and four 2.5-inch also drives. The cage for the 3.5-inch drives is on the front bottom of the case, while the smaller cage for the 2.5-inch drives is exactly about. All drives can install it without tools.

If you install the graphics cards or expansion cards can do that over the seven expansion slots of the housing. For this purpose, a screwdriver does not even have to be brought out, because over the thumbscrews can also integrate perfectly expansion cards without tools. A graphics card may thereby be up to 360 mm long. The power supply, which is placed on the ground below, may even be 200 mm long. A CPU cooler on the other hand can be up to 165 mm high, which should be sufficient for most tower coolers.

Also as far as the topic of cooling, the Graphite 230T Midi-Tower is convincing. In addition to the two pre-installed 120 mm fans in the front that light up in red, and a 120-cm fan in the back is installed. Additionally you can cover in either install two 140 mm fan or two 120mm fans. Moreover, even on the floor space for a 140er- or 120 fan. If you prefer water-cooled, may in the lid a 280 or 240 mm radiator and install a 120 mm radiator in the back.

Technical Details:

     Dimensions: 210 x 440 x 505 mm (W x H x D)
     Material: Steel
     Color: Black, Red
     Weight: 6.05 kg
     Form Factor: ATX, Micro-ATX, Mini-ITX
     Fans possible:
     2x 120 mm (front)
     2x 140/120 mm (cover)
     1x 120 mm (rear)
     1x 140/120 mm (bottom)
     Fans pre-installed:
     2x 120 mm (front, red LED)
     1x 120 mm (rear)
     Radiator Mountings (in case of partial lack of ventilation slots):
     1x 280/240 mm (cover)
     1x 120 mm (rear)
     Drive bays:
     3x 5.25 inch (external; no tools)
     4x 3.5 inch (internally; no tools)
     4x 2.5 inch (internally; no tools)
     Power Supply: Standard ATX (optional)
     Expansion Slots: 7
     I / O panel:
     2x USB 3.0
     1x per Audio In / Out
     Maximum video card length: 360 mm
     Maximum CPU cooler height: 165 mm
     Maximum PSU length: 200 mm