Coolgate G2 Radiator 10 FPI - 240mm [CG240G2]

The G2 radiators provide the current generation is on heat exchangers and of course meet this requirement better than ever. In black cloaked, the copper fins involve the same three parallel rows of tubes, each tube has a diameter of 16 mm, so a lot of water can flow through.

The cooling power, which manifests itself in the stately total height of 6.5 cm, but still connected by CoolGate with the possibility of a very quiet operation, because the fin density is at the G2 models only 10 FPI, which also slowly rotating Silent fan sufficient static pressure to penetrate the copper core muster.

These are either on one side or both sides in the here offered dual radiator design in 240-mm format. Thus, when mounting the 120mm fans, none of the tubes can be accidentally damaged, the tubes are not directly under the UNC 6-32 holes. If used properly, use CoolGate granted by the way a 3 year manufacturer warranty.

When you buy a G2-heat exchanger addition to the height of 65 mm and the length should be noted in this dual model, it is 272 mm. On the brass chambers are five G1 / 4-inch inputs are available, CoolGate provides three sealing plug with. In addition, the necessary screws for mounting two fans and for mounting in enclosures have.

Technical details:

     Dimensions: 120 x 65 x 272 mm (W x H x D)
     Weight: 1,120 g
     Material: copper (fins), brass (chambers)
     Color: Black
     Compatible fan: on both sides 2x 120 mm
     Fin density: 10 FPI
     Tube rows: 3
     Pressure tested: 1.5 bar
     Thread: 5x G1 / 4 inches
     Scope of delivery:
     8x screws UNC 6-32 long
     8x screws UNC 6-32 short
     3 screw plug
     2x frame
     1x Allen key