BitsPower VG AR9290X VGA Cooler for R9 290 / 290X - Acrylic [BP-WBVGAR9290XNPAC]

The problem is exacerbated by its own overclocking, because then the temperatures can rise to harmful levels. In short: Who wants in games operation or even at a low setting Benchen and possibly simultaneously wants to turn the clock screw, comes barely past a water cooling. In addition to the usual components (radiator, pump, expansion tank) a suitable cooler is of course necessary to - as this model of watercooling specialists Bitspower suitable for AMD graphics cards of type Radeon R9 290 and R9 290X.

There is a full-block design, which covers all relevant sources of heat the graphics card and thus effectively cools - ie the GPU, memory and voltage regulators. This electrolytic copper and an optimized channel structure to be used to transfer the heat optimally. To better protect and personalises the copper was coated with a silver layer of nickel. Through three 5 mm holes for LEDs, the appearance can be further customized.

The lid is made of acrylic glass, in which a stainless steel plate is recessed in the area of ​​the voltage converter. The connection terminal has two holes with G1 / 4-inch thread that can be used from both sides of the radiator from - the unneeded openings are then sealed with the enclosed plugs. The flat design of the radiator and the connection of multiple graphics cards in a CrossFireX composite is possible without any problems.

The necessary connections are not supplied. The cooler is suitable solely for the AMD Radeon R9 290X and AMD Radeon R9 290 in the reference design! The original cooler must be removed before installation, making the manufacturer's warranty expires!

Technical details:

    Dimensions: 266 × 126 × 22 mm (L × W × H)
    Material: Nickel Copper (base), acrylic glass and stainless steel (cover)
    Thread: 2 × G1 / 4 inch
    Compatibility:
    AMD Radeon R9 290 (reference design)
    AMD Radeon R9 290X (reference design)

Attention: Please note that some coolers are delivered with a protective film on the bottom. These must be removed before assembly and start-up in any case. We assume no liability for damages caused by faulty or incorrect installation and improper use!