The reservoir is sealed to the pump inlet when plugging by an O- ring, two latches snap into the pump housing and secure the reservoir against pulling and twisting , accidental removal of the bayonet lock of the pump is thus excluded. Two displaced by 90 ° connection thread ( front and side) allow for flexible mounting of the return line , so that the reservoir can be optimally used in tight spaces.
The reservoir aquainlet XT series are closely related to the aqualis series and are also equipped with a tube of borosilicate glass, which in contrast to the acrylic often used for tube expansion tank a very high hardness and scratch resistance, very low thermal expansion and excellent having chemical and thermal resistance . The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and lid are made of Delrin , top and bottom are connected by a steel bar .
The aquainlet XT versions have a built- in base acrylic glass windows and provide space for the installation of an LED (type 5 mm, not supplied ) . They are also equipped with an electronic level measurement with USB and aquabus interface , a configurable alarm output and an external temperature sensor input. For monitoring and configuring the aquasuite software available for download .
The four -pin aquabus interface allows direct connection to a Aquaero 5 Controller (not included) . The alarm output can be configured as a rpm signal for connection to a fan tachometer output signal evaluation (eg the mainboard ) or timer output , for example, to connect a LED in case of alarm . To raise an alarm Fill level and external temperature sensor input. The external temperature sensor input is compatible with all offered by Aqua computer temperature sensors.
Technical details :
Material: Delrin , borosilicate glass
Dimensions without pump: about 58 x 67 x 198 mm
Thread: 4x 1 /4 inch
Filling volume: 150 ml
Eheim 1046 pump and identical
Scope of delivery:
Two locking screws G1 / 4 ( pre-assembled)
Pressure equalization membrane ( pre-assembled)
internal USB connection cable