AquaComputer cuplex kryos NEXT with VISION AM4 - nickel / nickel [21711]

 Thus, the German Wakü specialist continues to claim the crown among the CPU water chillers, which is due not least to the usual diligence of experienced engineers, who have set new standards in the cooling performance through various analyzes, optimization procedures and tests.
The aquacomputer cuplex kryos NEXT CPU water cooler with VISION:

CPU water cooler from aquacomputer
Cooling floor with extremely fine microstructure (under 200 μm)
Nickel plated housing + nickel plated copper base
VISION module with OLED display
Two G1 / 4-inch connectors available
Compatible with AMD sockets of the AM4 series
Thermal Grizzly Kryonaut thermal grease contain (0.5 grams)
Optimized CPU water cooler with high performance & stylish design

The aquacomputer cuplex kryos NEXT surpasses the unprecedented cooling performance of the already successful predecessor and thus represents a new milestone in the development of CPU water chillers. The cooler floor is equipped with an extremely fine microstructure with a structure width of less than 200 μm. For optimal distribution of the coolant, a flat nozzle is integrated into the housing, whereby the coolant flows centrally onto the microstructure and is discharged from there in two directions.

The cuplex kryos NEXT is available in various versions, which is the completely nickel-plated version, which has a nickel-plated brass housing as well as a nickel-plated copper base and its outstanding appearance is only interrupted by the stainless steel plates of the mounting system.
Includes VISION module with OLED display & powerful electronics

The special feature of this model of the cuplex kryos NEXT cooler is the state-of-the-art VISION technology, which is based on a temperature sensor for the cooling medium as well as its own microprocessor, to control the OLED graphic display, integrated into the cooler housing, with a resolution of 128 x 64 pixels to display useful information there.

Thus, the water temperature measurement is directly integrated in the cooler and can be used in combination with the aquasuite software in addition to various further hardware data such as, for example, Processor load, can be displayed directly in the freely configurable display. In addition to the USB interface to the PC and the aquabus interface for data exchange with an aquaero 5 or 6, the connection option for a flow sensor or alternatively an alarm output exists. However, it should be noted that a maximum of two connecting cables can be routed into the radiator and the user must therefore decide which components he would like to connect.
Easy installation - ideal for the AMD AM4 socket

The mounting system of the cuplex kryos NEXT is very high-quality processed and allows an uncomplicated installation on various AMD pedestals of the AM4 series. Two massive stainless steel plates with a thickness of 2.5 millimeters and a total of four pressed nickel-plated spring cups produce a tidy and elegant appearance when installed. This is achieved mainly by the low overall height as well as the thumbscrews and springs hidden in the spring cups, which are intended for the actual mounting of the cooler on the mainboard. The thumbscrews can either be assembled comfortably by hand or by means of a hexagon socket wrench. Because the motherboard processor base already has a backplate, this variant of the cuplex kryos NEXT CPU water cooler does not contain an additional backplate.
Perfectly combined with Thermal Grizzly Kryonaut thermal grease

For optimal performance, the delivery of each cuplex kryos NEXT CPU water chiller is also a syringe with 0.5 grams of the extremely heat-conductive thermal Grizzly Kryonaut thermal grease, which should be sufficient for approximately five radiator coolers. Thanks to the plastic spatula supplied and the low viscosity of the thermal paste, it can also be distributed very well between CPU and water cooler.

Note: This product is supplied without the necessary connections to provide the buyer with the greatest possible freedom when assembling water cooling.

Technical details:
Dimensions (AM4): 111 x 75 x 22 mm (L x W x H)
Material: nickel-plated brass (housing), nickel-plated copper (radiator base), stainless steel (mounting frames)
Connections: 2x G1 / 4 inch
Thread spacing: 24 mm (center hole)
Compatibility: AMD socket AM4
Thermal compound: 0.5 gram Thermal Grizzly Kryonaut
Delivery:
1x aqua computer cuplex kryos NEXT radiator (mounted)
1x mounting bracket