Antec VSP-5000 Midi-Tower silenced - black [0-761345-92070-4]

The I / O panel is located on the lid of the VSP-5000, and contains two USB 3.0 ports, you must connect internally, two audio jacks and three switches with which you can control the three pre-installed fans. Of course, there is also a power switch and a reset button located on the lid.

Also in the top two 120 mm fans are already pre-installed. About this two fans, there is a simple removable mesh surface, which open via a switch on the back and then can easily be pulled out.

At the rear is a 120 mm fan is also preinstalled and ventilates the housing. In the front there are two more slots for optional 120 mm fan. There is a removable dust filter. Also on the ground under the power supply there is a dust filter. Both dust filters can remove and wash off easily.

If you prefer water cooling systems, for there are two rubberised passages at the back. Among them are also seven-slot expansion slot covers. Expansion cards and thus above all graphics cards can thereby be even up to 380 mm long. CPU coolers can be up to 158 mm high. In addition, the CPU cooler may be due to a cutout in the motherboard wall very easily installed or serviced.

Inside the case there is plenty of room for ATX motherboards, but also micro-ATX and Mini-ITX motherboards are compatible with the VSP-5000 Midi-Tower. The upper drive cage support next two 5.25-inch drives, an external 3.5-inch drive.

The two 5.25-inch drives can even be installed without tools. In the lower drive cage in turn four 3.5-inch drives can be integrated tools. In the cage, a 2.5-inch drive can again be screwed.

This, the lower drive cage is equipped with rubber gaskets that vibrations and thus minimizes noise. In addition, the side walls of the VSP-5000 there are silenced from the outset. Thus, the subtly designed VSP-5000 is not only a practical functional cabinet with room for components, but also relatively quiet.

Technical details:

     Dimensions: 205 x 476 x 458 mm (W x H x D)
     Material: Steel (Body), plastic (front cover)
     Weight: 4.7 kg
     Color: Black
     Form Factor: ATX, Micro-ATX, Mini-ITX
     Fan total possible:
     2x 120 mm (front)
     1x 120 mm (rear)
     2x 120 mm (lid)
     Of this pre-installed:
     1x120 mm (rear)
     2x 120 mm (lid)
     Filters: front, power supply (removable)
     Drive Bays:
     2x 5.25 inches (external; no tools)
     1x 3.5 inch (external)
     4x 3.5 inches (internal, tools)
     1x 2.5 inch (internal)
     Power supply: 1x Standard ATX (optional)
     Expansion Slots: 7
     I / O Panel:
     2x USB 3.0 (internal links)
     1x per Audio In / Out
     3x fan control
     Maximum video card length: 380 mm
     Maximum CPU cooler height: 158 mm