Antec P50 Micro ATX Cube - black Window [0-761345-81051-7]

The features of Antec P50:

Elegant design
Clever bicameral principle
Space for 2x 240mm Radiator
Up to 30 cm long graphics cards
Large side windows
4x USB & two fan controllers
Elegant Cube for potent gaming hardware

The left side of P50, a micro-ATX motherboard and up to 300mm long graphics cards accommodate. this chamber is cooled by two preinstalled 120 mm fans in the front, which can be supplemented by two 80 fans in the back. At the top of an optical drive can be installed .. If this option is not used, can be mounted in the lid, a 240-mm radiator between the two chambers.

The right ventricle is the home for the power supply and the data storage. Behind the front seats for two 2.5-inch SSDs offer vertically. Up to three 3.5-inch hard drives can be installed on the power supply. It is mounted on the back and requires removing a cover. This cover is fitted with a pre-installed 8-cm fan, which is responsible for cooling the chamber.

In the middle of the cube under the lid two 120 mm fans can be installed behind a Meshgitter. This completes the good cooling of the cube, while a CPU cooler can be up to 13 cm high. To control the fan are two Trinity, th-stage fan control ready in the cover. The I / O panel is very well equipped with two USB 3.0 and 2.0 ports and also has two audio jacks.

Through the window in the left part, a look at the built-in hardware are thrown. Thus this fails accordingly worthwhile, and the appropriate hardware should be used. The compact cube can mutate with a bit of planning to a high-end gaming PC.

An overclocked CPU can be tamed for example with a AiO-water cooling, the 240-mm radiator is mounted in the lid. The radiator of a graphics card with hybrid or AiO water cooling can be mounted in place of the front fan. In addition, the airflow can be optimized in the left ventricle by two optional 80 mm fan (with LEDs like).

Technical details:
Dimensions: 260 x 355 x 355 mm (W x H x D)
Material: Steel (Body), plastic (front cover)
Weight: approx 4.9 kg
Color: Black
Form Factor: Micro ATX, Mini-ITX
Fan total possible:
2x 120 mm (left front)
1x 80 mm (right front)
2x 80 mm (left rear)
1x 80 mm (right rear)
2x 120 mm (lid)
Of preinstalled:
2x 120 mm (left front)
1x 80 mm (right rear)
Filter: front, back, power supply (removable)
Radiator Mountings (partial waiving HDD and / or fan slots):
1x max. 240 mm (left front)
1x max. 240 mm (lid, without optical drive)
Drive Bays:
2x 5.25 inches (external, without tools)
3x 3.5 inch (internal)
2x 2.5 inch (internal)
PSU 1x standard ATX (optional)
Expansion Slots: 4
I / O panel:
2x USB 3.0 (internal connection)
2x USB 2.0 (internal connection)
1x per Audio In / Out
2x 3-stage-Lüftersteurung
Maximum video card length: 300 mm
Maximum CPU cooler height: 130 mm