Antec GX300 Midi-Tower - black [0-761345-15330-0]

The case appears in black and has a front side almost continuous 3D mesh surface. Thus, the front ensures good air circulation inside the midi towers.

The drive panel are kept in the same mesh style. The side panel has a slight elevation, which is a CPU cooler can be up to 140 mm high. Overall fit into the GX300 mid-tower quite a lot inside.

So motherboards in the ATX form factors, Micro-ATX and Mini-ITX be installed in Midi-Tower. In addition, three optical drives and six 3.5-inch or 2.5-inch each disk can be installed.

In the back of seven expansion cards can be installed in the appropriate slots. Graphics cards can this even be up to 400 mm long, which should be enough for any high-end claim.

In the front two 120 mm fan can be installed, the air being sucked into the housing. About two optional 120 in the cover as well as the pre-installed 120 mm fan in the rear of the air is again blown out of the housing.

The I / O panel is located on the lid and has next two audio jacks and a power button and a USB 3.0 and a USB 2.0 port. In addition, there is also a two-stage fan control on the I / O panel.

Technical details:

     Dimensions: 180 x 485 x 475 mm (W x H x D)
     Material: Steel (Body), plastic (front cover)
     Weight: 5.45 kg
     Color: Black
     Form Factor: ATX, Micro-ATX, Mini-ITX
     Fan total possible:
     2x 120 mm (front)
     1x 120 mm (rear)
     2x 120 mm (lid)
     Of this pre-installed:
     1x 120 mm (rear)
     Drive Bays:
     3x 5.25 inches (external)
     6x 3.5 / 2.5 inch (internal, tools)
     Power supply: 1x Standard ATX (optional)
     Expansion Slots: 7
     I / O Panel:
     1x USB 3.0 (internal links)
     1x USB 2.0 (internal links)
     1x per Audio In / Out
     Maximum video card length: 400 mm
     Maximum CPU cooler height: 140 mm