 |
SKU: 45306-2D5 Warranty: 12 months |
Overview
Alphacool‘s high-class solution for integration of single or dual VPP and TPP pumps into a cooling loop.
Pump top and reservoir in one component offer many advantages: Easy mounting, compact dimensions and appealing looks! All this is combined and perfected in the new Alphacool Repack. But Alphacool would not be Alphacool if these new products would not feature innovations which were before not available in this configuration!
The Alphacool Repack – Dual Laing D5 – Dual 5.25” bay station is for designed installation in the front of an enclosure. For mounting two vacant 5.25” drive bays are required. Mounting of the pump(s) can be done individually or in a dual configuration. For both configurations all required material is included. Dual operation can be configured to couple the pumps serially or for parallel operation. The pumps always draw the coolant from one combined reservoir.
Anti Cyclon:
Different than standard solutions, where the coolant is guided around many edges and corners, still leaving micro-bubbles in the coolant, this reservoir uses a completely new technology. A new kind of filter is placed in front of both pump inlets, marked with “in” & “out”, eliminating the problem of micro bubbles at the core.
Filling:
On standard Slot-In reservoirs filling was a hassle: Unscrew, pull out, fill, fixate again. And during filling a third and fourth hand would always come in very handy, as it is always a very difficult operation to fill in the coolant. Enough! The front is equipped with a filling straw which can be released with few turns, and as it is hollow it can be used for filling of the reservoir. For this we recommend the filling bottles or straws from our portfolio.
Looking at all of these features, more power, great looks and comfortable handling, a simple question comes up: Why only high-class, this is already First Class!
Technical specifications:
Material: Plexiglas/Acetal, Brass
Color: Transparent/black/Copper
Connection threads: 4x ¼“
Dimensions (L x W x H): 172 x 148 x 84mm
Mount for 10cm CCFL
Opening for 2x 3 or 5mm LED
Conforms with ROHS
Extent of delivery:
1x Alphacool Repack - Dual Laing D5 - Dual 5,25 Bay Station
4x Mounting screws
Allen key
Pump Specification:
Summary of benefits:
• 50,000 hours MTBF (Mean Time Between Failure) equivalent to 5 years lifetime.
• Superior 12 Volts DC convenience: plugs into the computer power supply
• Superior real world performance
• High pressure capability of the MCP655™ is particularly well adapted to high-flow systems using 1/2" ID tubing
• Pump speed can be adjusted to yield top performance or virtually silent operations (model MCP655 only)
• Compact Design.
• Quiet operations even at high speed thanks to new chipset controller
• ½" Barb fittings.
• No maintenance when used with de-mineralized water, and anti-fungal additives (Our HydrX™ additive is recommended)
• Quick installation with adhesive neoprene pad, or permanent installation with thru-bolts.
• Size: 90 x 90 x 90mm
• Operating voltage range: 8 to 24VDC
• Nominal voltage: 12 V DC
• Nominal Power (@12V): 24W
• Nominal current (@12V): 2 amps
• Maxium head: 10 ft (3.1 m)
• Nominal discharge (@12V): ~ 317 GPH -1200 LPH (Variable)
• Connection size: 1/2'' barbs (12mm)
• Maximum pressure: 50 PSI (3.5 BAR)
• Temperature range: Up to 140°F (60°C)
• Electrical connector: Molex 4pin
• Motor type: Brushless, microprocessor controlled
• MTBF: 50,000 Hours
• Weight: 1.4 LB, 650g
• Compact size allows installation almost anywhere in the case
This pump is RPM adjustable • P1 = 1.800 revs./min
• P2 = 2.550 revs./min
• P3 = 3.300 revs./min
• P4 = 4.050 revs./min
• P5 = 4.800 revs./min
Important:
Due to the large choice of enclosures, problems may occur when inserting the reservoir. The dimensions were chosen to fit flush into the front of an enclosure. Mounting completely inside the enclosure is only possible with modifications.
