Akasa Raspberry Pi (B + /2/3), ASUS Tinker Board Housing 1 - black [A-RA02-M1B]

Predestined for robotics and embedded projects, the Raspberry Pi is also used as a media center, thin client or server, in addition to the intended application areas - such as the learning of programming languages or the acquisition of hardware knowledge - by home users.

In the summer of 2014, the model B + was followed by a revised version of the Raspberry Pi. In addition to two additional USB ports, there is also a space-saving microSD slot as well as an extended GPIO header with 40 pins. In addition, the connection configuration was optimized, which is also expected by the 2015, significantly faster Raspberry Pi 2 as well as the Raspberry Pi 3 released in early 2016. Thanks to the otherwise identical circuit board layout, all these models fit into the same chassis.

The stylish and stylish Akasa Raspberry Pi / Asus tinkerboard case is suitable not only for the Raspberry Pi 1 Model B +, but also for the Raspberry Pi 3, the Raspberry Pi 2 and the ASUS Tinker Board And geeks who value an attractive look of their mini-computer in the living room or at any other place. In the sense of the elegant design, the microSD card of a Raspberry Pi is completely enclosed by the Akasa Pi housing and discreetly concealed from the outside. This also protects them against damage and dust.

Visually, the housing looks very classy and impresses especially with the high-quality aluminum parts, which have been colored black by the sandblasting process. The cover of the small housing even has a so-called "diamond edge", which gives the design the finishing touch.

The Akasa Pi Case provides I / O ports for all connections of the compatible Raspberry Pi circuit boards. In addition, openings for flat-ribbon cables of the 40-pin GPIO port or for the optional camera module as well as the display interface are incorporated. Due to the extremely low heat emission of the Broadcom chip on the Raspberry-Pi mainboard, the pocket computer can be cooled passively and completely silently. Due to the cooling effect of the ventilation openings on the housing base, the Pi housing from Akasa is also suitable for overclockings, which are possible with Raspberry Pi even without guarantee loss.

Technical details:
Dimensions: 68 x 29 x 92 mm (W x H x D)
Material: aluminum
Weight: approx. 150 g
Color: Black
Compatibility:
Raspberry Pi 1 - Model B +
Raspberry Pi 2 - Model B
Raspberry Pi 3 - Model B
ASUS Tinker Board
I / O-ports:
1x CSI camera module (flat ribbon opening)
1x DSI display connector (flat panel opening)
1x GPIO (40-pin) (flat-ribbon opening)
1x LAN (RJ-45)
4x USB 2.0
1x WiFi antenna port
1x Micro-USB (Power)
1x composite video / audio output (3.5 mm jack, 4-pin)
1x HDMI