Aerocool P7-F12 Pro LED fan set, RGB - 120mm [ACF3-P710227.01]

 The fans have 4-pin PWM connectors and are controlled directly via the included fan hub. The fans remain relatively smooth in spite of their high performance.
The features of the Aerocool P7-F12 Pro at a glance:

Practical set with three 120mm fans & RGB controller hub
Specially shaped fan blades with fine fins for efficient control of the airflow
Anti-vibration pads and easy-to-remove fan blades for easy maintenance
Stylish RGB illumination with 16.7 million colors and three LED modes
1.200 rpm / 1.01 mm H2O / 14.5 dB (A) / 4-pin PWM connector
Powerful PWM fan with RGB LED lighting

The Aerocool P7-F12 LED fans are high-performance PWM fans that feature smart details such as integrated vibration dampers and easy-to-remove fan blades. The fans achieve a good contact pressure with low noise emissions of only 14.5 dB (A) at 1,01 mm H2O at 1,200 rpm by means of aerodynamically shaped blade ends, which are equipped with small fins. The extremely stylish LED lighting makes the transparent fan blades shine in 16.8 million color shades in combination with the hub included here or directly from the mainboard. The Project7 software can also control many details of the lighting as well as the fan speed. Anti-vibration dampers are used in the corners, which effectively decouple the P7-F12 fans acoustically.

The P7-H1 fan hub included in this set allows the control of up to five 4-pin or 3-pin fans, all of which can be controlled with regard to lighting and power via the appropriate software. In addition to the fans, two RGB LED strips can be connected, which should increase the lighting possibilities. As an alternative to the hub, however, the fans can also be directly controlled via a compatible motherboard with ASUS AurA, Gigabyte RGB Fusion or MSI Mystic Light Sync support.

Technical details (fan):
Quantity: 3 pieces
Dimensions: 120 x 120 x 25 mm
Material: plastic / rubber
Volume: 14.5 dB (A)
Speed: 1,200 rpm
Delivery volume: 77.8 m³ / h
Air pressure: 1.01 mm H2O
Illumination: RGB-LED (illuminated only in connection with hub or LED-compatible mainboard)
Power Consumption: 1.8 W
Power: 9V
Bearing: hydraulic
MTBF: 60,000 h
Connection: 4-pin

Technical details (stroke):
Fan channels: 5 (up to 18 watts per channel)
LED channels: 2 (up to 24 watts per channel)
Connection: 9-pin USB 2.0
Compatibility: Windows 7 and newer
Delivery:
1x P7-H1 stroke
1x Velcro tape
4x screw
4x cable connector in black