Description:
This spiffy appliqué is 3" in diameter and proudly features our Petra'sTech logo in brilliant, gloss black silhouette. ...and if I don't know any better, I'd think think that this was some cheesy collector's coin commercial. Anyway, help support Petra'sTech in the UK and buy our stick...err...appliqués! ;-)

Application Instructions:
• 1) Carefully clean application area with a mild soap and water solution.
• 2) Rinse and dry the application area, making sure that there is no soap residue remaining.
• 3) Spray a fine mist of clean water onto the application area to aide in the positioning of your appliqué.
• 4) Carefully remove the opaque white backing from your appliqué. While doing so, be sure that the appliqué stays adhered to the translucent application sheet. If it begins to peel away from the application sheet, then carefully lay the application sheet back down onto the white backing materiel and use a credit card to "squeegee" the application sheet to the appliqué (after which, you may resume the removal of the backing materiel).
• 5) Apply appliqué to desired surface by making contact at one side (top or bottom tends to be easiest) and using a credit card (or similar tool) to "squeegee" the appliqué on.
• 6) "Squeegee" any trapped air bubbles out with a credit card (or similar tool), starting at the center of the appliqué and working your way outward.
• 7) Remove the application sheet and inspect appliqué for any remaining air bubbles. Small air bubbles usually work themselves out within a few days, larger bubbles may require more immediate "squeegee" work. Avoid poking holes in the applique to remove air bubbles, as this method should only be used as a last resort!
• 8) Enjoy your spiffy new sitck...err...appliqué! :-)