13mm barb fitting made ​​from nickel-coated brass with O-ring seal for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1 / 4 "outer thread.
Note: For safety reasons we recommend fixation of the hose with a hose clamp or zip tie.

Technical data:
Thread: G1 / 4
Overall length: 27mm
Hose inner diameter: 11 to 13mm
Inner diameter of connector: 9.9 mm
Thread length: 8mm

Note for watercooling beginners:
The connectors for imperial hoses (7 / 16 ", 3 / 8 ", ½ ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation . If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.