Our trusted fittings are available in a whole new design!

Robust high-quality barbed fitting with cylindrical thread (G1 / 4 "). The fitting is suitable for PVC, OU, PA, PE and silicone hoses with an inner diameter of 13mm. With integrated 1 / 4 " Nitrile (r) O Ring seal.

Technical specifications:
Thread Size: G1 / 4
Thread length: 6mm
Compatible with hoses with an inner diameter of 13mm (1 / 2 ")
Fitting inner diameter: 10mm
Upper fitting outer ring: 15.8mm
Middle hose contact surface: 14.3mm
Key width: 16mm

Extent of delivery:
Black nickel barbed fitting with O-ring seal

Note for watercooling beginners:
The connectors for hoses (7 / 16 ", 3 / 8 ", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.