13mm barbed fitting made ​​from brass and nickel coated with O-ring gasket for PVC, PU, PA., silicone or PE hoses with an inner diameter of 13mm. G1 / 4 "outer thread.

Technical specifications:
Length: 21mm
Width: 18mm
Thread: 1 / 4 "
Material: Silver nickel plated brass

Extent of delivery:
1x 13mm (3 / 8 ") barbed fitting G1 / 4" with O-ring
Note for watercooling beginners:

The connectors for hoses (7 / 16 ", 3 / 8 ", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3 / 8 ") hose clamp: up to 8mm none, from 10mm up required
10mm (7 / 16 ") hose clamp: up to 8mm none, from 10mm up required
12mm (1 / 2 ") hose clamp: 11mm up to none, from 12mm up required
13mm (1 / 2 ") hose clamp: 11mm up to none, from 13mm up required