12mm nickel coated brass barb fitting with O-ring seal for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1 / 4 "outer thread. The hose has to be fixated with a hose clamp or a zip tie. Inner diameter of fitting: 9.5 mm.

Note for watercooling beginners:
The connectors for imperial hoses (7 / 16 ", 3 / 8 ", ½ ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation . If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.