12V Laing DDC-1T Pro 10W w/EK V2 DDC X-TOP Rev2- Acetal [DDC10-V2EKAC]

EK V2 X-Top Acetal Pump Top Spec (w/18W DDC-1 Ultra)::
• Model: V2 X-Top Acetal
• Top Dimensions: 80 x 65 x 25mm
• Material: 100% Acetal
• Surface Finish: Smooth & Transparent
• Inlet/Outlet Thread Type: G1/4 (1/4" BSPP)
• Max. Head Pressure (at 12V): 4.7m
• Max. Discharge (at 12V): 950 lt/hour

DDC-1 Pro (10W) Spec:
• Nominal Voltage: 12 VDC
• Minimum Starting Voltage: 9 VDC
• Nominal Power (@12 V): 8.3W
• Motor Type: Electronically commutated, brushless DC, spherical motor
• Max. Head - Blue Impeller: 3.7m
• Max. Discharge - Blue Impeller: 564 lt/hour
• Temperature Range: Up to 140°F (60°C)
• Electrical Connector: 4pin Molex
• Weight: 7.3 oz (207 gr.)
• RPM Sensor: 3 pin connector

DDC-1 Ultra (18W) Spec:
• Nominal Voltage: 12 VDC
• Minimum Starting Voltage: 9 VDC
• Nominal Power (@12 V): 18 W
• Motor Type: Electronically commutated, brushless DC, spherical motor
• Max. Head - Blue Impeller: 4.7m
• Max. Discharge - Blue impeller: 950 lt/hour
• Temperature Range: Up to 140°F (60°C)
• Electrical Connector: 4pin Molex
• Weight: 7.3 oz (207 gr.)
• RPM Sensor: 3 pin connector

Included:
• (1x) Laing DDC-1T Ultra Pump
• (1x) EK V2 X-Top Acetal
• (4x) 20mm Stainless Steel M4 Phillips Head screws
• (2x) Fittings of your choice

NOTE: This pump has a blue wire 3pin wire seperate to the power lead, attach this to the Motherboard for RPM monitoring. You can also program the bios to shut down the pc or sound an alarm on RPM drops

---

Please use the following PDF files for more information on this product.