Robust high-quality black nickel plated barbed fitting with cylindrical thread (G1 / 4 "). The fitting is suitable for PVC, PU, PA, PE and silicone hoses with an inner diameter of 10mm. With integrated 1 / 4 " Nitrile (r ) O-ring seal.
We recommend the use of hose clamps or zip ties for best possible safety!

Note for watercooling beginners:
The connectors for hoses (7 / 16 ", 3 / 8 ", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3 / 8 ") hose clamp: up to 8mm none, from 10mm up required
10mm (7 / 16 ") hose clamp: up to 8mm none, from 10mm up required
12mm (1 / 2 ") hose clamp: 11mm up to none, from 12mm up required
13mm (1 / 2 ") hose clamp: 11mm up to none, from 13mm up required