10mm barb fitting made ​​from nickel-coated brass for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1 / 2 "outer thread straight threads, SW 24th With O-ring seal connector inner diameter:.. 6.8 mm.

Note for watercooling beginners:
The connectors for imperial hoses (7 / 16 ", 3 / 8 ", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp .