10mm barb fitting made ​​from nickel-coated brass with O-ring for PVC, PU, PA, silicone or PE hoses with an inner diameter of 10mm. G1 / 4 "outer threads. threads straight, SW 14th

Note for watercooling beginners:
The connectors for imperial hoses (7 / 16, 3 / 8, œ) are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.